Thermal ConductivityWatts per Centimeter Kelvin to Kilowatts per Meter Kelvin

Watts per centimeter-kelvin to Kilowatts per meter-kelvin

Snapshot

1 Watts per centimeter-kelvin equals 0.1 Kilowatts per meter-kelvin. Conversion Encyclopedia uses the same fixed conversion basis across the calculator, common values, and reverse page for this page.

Reference basis: This conversion uses a fixed factor based on physics reference unit model.
Example: For 0.01 Watts per centimeter-kelvin, the result equals 0.001 Kilowatts per meter-kelvin.
Use the reverse page if you need the opposite direction with the same basis.

Use the interactive calculator below for custom values and the common-value table for quick checks.

Interactive conversion

Converter Calculator

0.1 Kilowatts per meter-kelvin (kW/(m·K))

Switch

Machine access

Available to apps and AI agents

Watts per centimeter-kelvin to Kilowatts per meter-kelvin can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The identifiers below select the same calculation as the calculator.

Machine-readable identifiers

Conversion family: thermal-conductivity
Source unit: watts_per_centimeter_kelvin
Target unit: kilowatts_per_meter_kelvin

The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.

Example API request and response

POST /api/v1/convert

Request

{
  "family": "thermal-conductivity",
  "value": 1,
  "from": "watts_per_centimeter_kelvin",
  "to": "kilowatts_per_meter_kelvin"
}

Essential response

{
  "ok": true,
  "conversion": {
    "family": "thermal-conductivity",
    "value": 1,
    "from": "watts_per_centimeter_kelvin",
    "to": "kilowatts_per_meter_kelvin",
    "result": {
      "raw": 0.1,
      "display": "0.1"
    },
    "canonicalPath": "/thermal-conductivity/watts-per-centimeter-kelvin-to-kilowatts-per-meter-kelvin/"
  }
}

Full API documentation

Explanation

Formula: Kilowatts per meter-kelvin = Watts per centimeter-kelvin × 0.1. Why: centimeter-based conductivity units are tied to the same heat-flow quantity but use a different length basis, so the route converts through W/(m·K) with exact length scaling.

Watts per centimeter-kelvin (W/(cm·K)): a conductivity unit using centimeter length basis, sometimes seen in specialized engineering references.

Kilowatts per meter-kelvin (kW/(m·K)): a larger SI-scaled conductivity unit equal to 1,000 W/(m·K).

This route is useful when restating thermal-conductivity values across SI and engineering scales so material datasheets and heat-transfer calculations stay on the intended basis.

This conversion is purely multiplicative because both units reduce through watts per meter-kelvin using fixed thermal-conductivity definitions with no offset.

Method & Reference

Method basis: exact conversion formula shown in Snapshot.
Applied factor: 1 Watts per centimeter-kelvin = 0.1 Kilowatts per meter-kelvin.
Consistency rule: calculator output and table values use the same constants and rounding policy.

Common Conversion Values

Watts per centimeter-kelvin (W/(cm·K))	Kilowatts per meter-kelvin (kW/(m·K))
0.01	0.001
0.1	0.01
0.5	0.05
1	0.1
5	0.5
10	1
50	5
100	10

Questions & answers

Frequently Asked Questions

What result does this Watts per centimeter-kelvin to Kilowatts per meter-kelvin page give for an input of 1?

For an input of 1 Watts per centimeter-kelvin, this page gives 0.1 Kilowatts per meter-kelvin.

Does this Watts per centimeter-kelvin to Kilowatts per meter-kelvin page just change the length basis inside the same conductivity model?

Yes. Centimeter-based conductivity routes stay inside the same heat-flow model and only change the length basis through exact scaling around watts per meter-kelvin.

When would I convert watts per centimeter-kelvin to kilowatts per meter-kelvin?