US Quarts to Short Tons (US) for Kerosene
Snapshot
For Kerosene, 1 US Quart equals about 0.000845 Short Tons (US).
- Material basis: Kerosene at 810 kg/m^3.
- Example: For 0.1 US Quarts of Kerosene, the result is 0.000084 Short Tons (US).
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.000845 Short Tons (US) (Kerosene)
SwitchAPI and AI agent access
US Quarts to Short Tons (US) for Kerosene. Material: kerosene.
Machine-readable identifiers
- Conversion family
material-density- Source unit
quart_us- Target unit
short_ton_us- Material
kerosene
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "quart_us",
"to": "short_ton_us",
"material": "kerosene"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "quart_us",
"to": "short_ton_us",
"result": {
"raw": 0.000844972200767,
"display": "0.000845"
},
"canonicalPath": "/material-density/us-quarts-to-short-tons/kerosene/"
}
}Explanation
US Quarts of Kerosene convert to short tons (us) using one fixed density basis of 810 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative kerosene density near room temperature.
Common Conversion Values
| US Quarts (Kerosene) | Short Tons (US) (Kerosene) |
|---|---|
| 0.1 | 0.000084 |
| 1/4 | 0.000211 |
| 1/2 | 0.000422 |
| 1 | 0.000845 |
| 2 | 0.00169 |
| 5 | 0.004225 |
| 10 | 0.00845 |
| 25 | 0.021124 |
| 50 | 0.042249 |
| 100 | 0.084497 |
Methodology
Kerosene density and calculation basis
Evidence status: needs-review.
Kerosene density depends on fuel specification and temperature.
temperature: 20 °C
grade: Illuminating kerosene, TotalEnergies Kenya
Source basis: TotalEnergies Kenya, Illuminating kerosene specification. Illuminating kerosene specification: density. https://totalenergies.ke/corporate-solutions/fuels/kerosene Applicability: conditional-comparison.
Establish grade and a representative density, not only a maximum.
Only an upper limit; does not establish a representative value.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00084497 ton (US) per qt (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.