US Quarts to Short Tons (US) for Ethanol
Snapshot
For Ethanol, 1 US Quart equals about 0.000823 Short Tons (US).
- Material basis: Ethanol at 789 kg/m^3.
- Example: For 0.1 US Quarts of Ethanol, the result is 0.000082 Short Tons (US).
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.000823 Short Tons (US) (Ethanol)
SwitchAPI and AI agent access
US Quarts to Short Tons (US) for Ethanol. Material: ethanol.
Machine-readable identifiers
- Conversion family
material-density- Source unit
quart_us- Target unit
short_ton_us- Material
ethanol
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "quart_us",
"to": "short_ton_us",
"material": "ethanol"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "quart_us",
"to": "short_ton_us",
"result": {
"raw": 0.00082306551408,
"display": "0.000823"
},
"canonicalPath": "/material-density/us-quarts-to-short-tons/ethanol/"
}
}Explanation
US Quarts of Ethanol convert to short tons (us) using one fixed density basis of 789 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Typical pure ethanol density near room temperature.
Common Conversion Values
| US Quarts (Ethanol) | Short Tons (US) (Ethanol) |
|---|---|
| 0.1 | 0.000082 |
| 1/4 | 0.000206 |
| 1/2 | 0.000412 |
| 1 | 0.000823 |
| 2 | 0.001646 |
| 5 | 0.004115 |
| 10 | 0.008231 |
| 25 | 0.020577 |
| 50 | 0.041153 |
| 100 | 0.082307 |
Methodology
Ethanol density and calculation basis
Evidence status: publishable.
Reference density for anhydrous ethanol at 20 °C; not for diluted alcoholic drinks.
temperature: 20 °C
concentration: Anhydrous ethanol, ≥99.5%, 200 proof
state: Liquid
Source basis: Merck / Sigma-Aldrich, Ethanol 459836, anhydrous, 200 proof, ≥99.5%. Properties: assay, form, density. https://www.sigmaaldrich.com/US/en/product/sial/459836 Applicability: adopted-context.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00082307 ton (US) per qt (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.