US Quarts to Short Tons (US) for Diesel Fuel
Snapshot
For Diesel Fuel, 1 US Quart equals about 0.000868 Short Tons (US).
- Material basis: Diesel Fuel at 832 kg/m^3.
- Example: For 0.1 US Quarts of Diesel Fuel, the result is 0.000087 Short Tons (US).
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.000868 Short Tons (US) (Diesel Fuel)
SwitchAPI and AI agent access
US Quarts to Short Tons (US) for Diesel Fuel. Material: diesel-fuel.
Machine-readable identifiers
- Conversion family
material-density- Source unit
quart_us- Target unit
short_ton_us- Material
diesel-fuel
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "quart_us",
"to": "short_ton_us",
"material": "diesel-fuel"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "quart_us",
"to": "short_ton_us",
"result": {
"raw": 0.00086792206301,
"display": "0.000868"
},
"canonicalPath": "/material-density/us-quarts-to-short-tons/diesel-fuel/"
}
}Explanation
US Quarts of Diesel Fuel convert to short tons (us) using one fixed density basis of 832 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative diesel density; blend-dependent.
Common Conversion Values
| US Quarts (Diesel Fuel) | Short Tons (US) (Diesel Fuel) |
|---|---|
| 0.1 | 0.000087 |
| 1/4 | 0.000217 |
| 1/2 | 0.000434 |
| 1 | 0.000868 |
| 2 | 0.001736 |
| 5 | 0.00434 |
| 10 | 0.008679 |
| 25 | 0.021698 |
| 50 | 0.043396 |
| 100 | 0.086792 |
Methodology
Diesel Fuel density and calculation basis
Evidence status: publishable.
Representative diesel density at 15 °C; the cited range applies to Futura DI-15/-25.
temperature: 15 °C
grade: Neste Futura Diesel DI-15/-25
method: EN ISO 12185 / 3675
Source basis: Neste, Futura Diesel -15/-25, DI-15/-25, TDS 2023-01-01. TDS 2023-01-01, density at 15 °C. https://www.neste.com/files/pdf/a77U5pQjbIyisUyXWHdAY-150312_en.pdf Applicability: adopted-context.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00086792 ton (US) per qt (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.