US Quarts to Short Tons (US) for Steel (Carbon)
Snapshot
For Steel (Carbon), 1 US Quart equals about 0.008189 Short Tons (US).
- Material basis: Steel (Carbon) at 7,850 kg/m^3.
- Example: For 0.1 US Quarts of Steel (Carbon), the result is 0.000819 Short Tons (US).
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.008189 Short Tons (US) (Steel (Carbon))
SwitchAPI and AI agent access
US Quarts to Short Tons (US) for Steel (Carbon). Material: steel-carbon.
Machine-readable identifiers
- Conversion family
material-density- Source unit
quart_us- Target unit
short_ton_us- Material
steel-carbon
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "quart_us",
"to": "short_ton_us",
"material": "steel-carbon"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "quart_us",
"to": "short_ton_us",
"result": {
"raw": 0.00818892811854,
"display": "0.008189"
},
"canonicalPath": "/material-density/us-quarts-to-short-tons/steel-carbon/"
}
}Explanation
US Quarts of Steel (Carbon) convert to short tons (us) using one fixed density basis of 7850 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Standard engineering density for carbon steel.
Common Conversion Values
| US Quarts (Steel (Carbon)) | Short Tons (US) (Steel (Carbon)) |
|---|---|
| 0.1 | 0.000819 |
| 1/4 | 0.002047 |
| 1/2 | 0.004094 |
| 1 | 0.008189 |
| 2 | 0.016378 |
| 5 | 0.040945 |
| 10 | 0.081889 |
| 25 | 0.204723 |
| 50 | 0.409446 |
| 100 | 0.818893 |
Methodology
Steel (Carbon) density and calculation basis
Evidence status: publishable.
Nominal density adopted for structural steel calculations; an engineering reference value.
grade: Structural steel engineering model
method: Constant density assumption in structural fire design
Source basis: European Commission JRC, Structural Fire Design — Worked Examples (2014), EUR 26698 EN. PDF p.85, Figure 2.4.7: density of steel. https://eurocodes.jrc.ec.europa.eu/sites/default/files/2022-06/2012_11_WS_fire.pdf Applicability: adopted-context.
A design assumption, not evidence that physical density is invariant with temperature.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00818893 ton (US) per qt (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.