Short Tons (US) to US Quarts for Steel (Carbon)
Snapshot
For Steel (Carbon), 1 Short Ton (US) equals about 122.116104 US Quarts.
- Material basis: Steel (Carbon) at 7,850 kg/m^3.
- Example: For 0.1 Short Tons (US) of Steel (Carbon), the result is 12.21161 US Quarts.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
122.116104 US Quarts (Steel (Carbon))
SwitchAPI and AI agent access
Short Tons (US) to US Quarts for Steel (Carbon). Material: steel-carbon.
Machine-readable identifiers
- Conversion family
material-density- Source unit
short_ton_us- Target unit
quart_us- Material
steel-carbon
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "short_ton_us",
"to": "quart_us",
"material": "steel-carbon"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "short_ton_us",
"to": "quart_us",
"result": {
"raw": 122.116104272,
"display": "122.116104"
},
"canonicalPath": "/material-density/short-tons-to-us-quarts/steel-carbon/"
}
}Explanation
Short Tons (US) of Steel (Carbon) convert to us quarts using one fixed density basis of 7850 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Standard engineering density for carbon steel.
Common Conversion Values
| Short Tons (US) (Steel (Carbon)) | US Quarts (Steel (Carbon)) |
|---|---|
| 0.1 | 12.21161 |
| 1/4 | 30.529026 |
| 1/2 | 61.058052 |
| 1 | 122.116104 |
| 2 | 244.232209 |
| 5 | 610.580521 |
| 10 | 1,221.161043 |
| 25 | 3,052.902607 |
| 50 | 6,105.805214 |
| 100 | 12,211.610427 |
Methodology
Steel (Carbon) density and calculation basis
Evidence status: publishable.
Nominal density adopted for structural steel calculations; an engineering reference value.
grade: Structural steel engineering model
method: Constant density assumption in structural fire design
Source basis: European Commission JRC, Structural Fire Design — Worked Examples (2014), EUR 26698 EN. PDF p.85, Figure 2.4.7: density of steel. https://eurocodes.jrc.ec.europa.eu/sites/default/files/2022-06/2012_11_WS_fire.pdf Applicability: adopted-context.
A design assumption, not evidence that physical density is invariant with temperature.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 122.116104 qt (US) per ton (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.