US Cups to Kilograms for Plastic (PET)
Snapshot
For Plastic (PET), 1 US Cup equals about 0.324126 Kilograms. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Plastic (PET) at 1,370 kg/m^3.
- Example: For 0.1 US Cups of Plastic (PET), the result is 0.032413 Kilograms.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Interactive conversion
Converter Calculator
0.324126 Kilograms (Plastic (PET))
SwitchMachine access
Available to apps and AI agents
US Cups to Kilograms for Plastic (PET) can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The plastic-pet identifier tells the conversion engine which material record to use for the same calculation shown by the calculator.
Machine-readable identifiers
- Conversion family
material-density- Source unit
cup_us- Target unit
kilogram- Material
plastic-pet
The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "cup_us",
"to": "kilogram",
"material": "plastic-pet"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "cup_us",
"to": "kilogram",
"result": {
"raw": 0.324125884005,
"display": "0.324126"
},
"canonicalPath": "/material-density/us-cups-to-kilograms/plastic-pet/"
}
}Explanation
US Cups of Plastic (PET) convert to kilograms using one fixed density basis of 1370 kg/m^3. The same density model is used in the calculator, common values, and mirror route so weight, mass, and volume checks stay aligned.
Typical PET polymer density.
Common Conversion Values
| US Cups (Plastic (PET)) | Kilograms (Plastic (PET)) |
|---|---|
| 0.1 | 0.032413 |
| 0.25 | 0.081031 |
| 0.5 | 0.162063 |
| 1 | 0.324126 |
| 2 | 0.648252 |
| 5 | 1.620629 |
| 10 | 3.241259 |
| 25 | 8.103147 |
| 50 | 16.206294 |
| 100 | 32.412588 |
Methodology
Plastic (PET) density and calculation basis
Plastic (PET) is represented in this table by a fixed reference density of 1370 kg/m^3, equivalent to 1.37 g/cm^3. Typical PET polymer density.
At this fixed reference, 1 liter of Plastic (PET) corresponds to 1.37 kg, while 1 kg corresponds to 0.729927 liters. Its table density is 37.4% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 4 fixed table records labeled Polymers, the nearest density to Plastic (PET) is Plastic (PVC) at 1380 kg/m^3: an absolute difference of 10 kg/m^3 (0.7% relative to Plastic (PET)). 2 records have a lower fixed density and 1 have a higher one. The observed range in this labeled group is Plastic (HDPE) at 950 kg/m^3 to Plastic (PVC) at 1380 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.324126 kg per cup (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Questions & answers
Frequently Asked Questions
How much kg is 1 cup (US) of Plastic (PET)?
1 cup (US) of Plastic (PET) equals 0.324126 kg with the fixed density basis used here.
What density is used for Plastic (PET)?
Plastic (PET) uses a fixed density of 1370 kg/m^3.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (Kilograms to US Cups for Plastic (PET)) to convert in the opposite direction with the same fixed density basis.