Material DensityKilograms to US Cups

Kilograms to US Cups for Plastic (PET)

Snapshot

For Plastic (PET), 1 Kilogram equals about 3.085221 US Cups. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.

Material basis: Plastic (PET) at 1,370 kg/m^3.
Example: For 0.1 Kilograms of Plastic (PET), the result is 0.308522 US Cups.
Use the reverse page if you need the opposite direction with the same basis.

Use the interactive calculator below for custom values and the common-value table for quick checks.

Interactive conversion

Converter Calculator

3.085221 US Cups (Plastic (PET))

Switch

Machine access

Available to apps and AI agents

Kilograms to US Cups for Plastic (PET) can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The plastic-pet identifier tells the conversion engine which material record to use for the same calculation shown by the calculator.

Machine-readable identifiers

Conversion family: material-density
Source unit: kilogram
Target unit: cup_us
Material: plastic-pet

The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.

Example API request and response

POST /api/v1/convert

Request

{
  "family": "material-density",
  "value": 1,
  "from": "kilogram",
  "to": "cup_us",
  "material": "plastic-pet"
}

Essential response

{
  "ok": true,
  "conversion": {
    "family": "material-density",
    "value": 1,
    "from": "kilogram",
    "to": "cup_us",
    "result": {
      "raw": 3.08522104944,
      "display": "3.085221"
    },
    "canonicalPath": "/material-density/kilograms-to-us-cups/plastic-pet/"
  }
}

Full API documentation

Explanation

Kilograms of Plastic (PET) convert to us cups using one fixed density basis of 1370 kg/m^3. The same density model is used in the calculator, common values, and mirror route so storage, batching, and material-planning checks stay aligned.

Typical PET polymer density.

Material & Method

Material used: Plastic (PET). Method basis: density fixed at 1,370 kg/m^3 for every calculation on this page.
Applied relationship: 1 Kilogram (mass) = 3.085221 US Cups (volume) using the same material density basis.
Reference rule: snapshot, calculator, and common values table use the same material basis throughout the page.

Common Conversion Values

Kilograms (Plastic (PET))	US Cups (Plastic (PET))
0.1	0.308522
0.25	0.771305
0.5	1.542611
1	3.085221
2	6.170442
5	15.426105
10	30.85221
25	77.130526
50	154.261052
100	308.522105

Methodology

Plastic (PET) density and calculation basis

Plastic (PET) is represented in this table by a fixed reference density of 1370 kg/m^3, equivalent to 1.37 g/cm^3. Typical PET polymer density.

At this fixed reference, 1 liter of Plastic (PET) corresponds to 1.37 kg, while 1 kg corresponds to 0.729927 liters. Its table density is 37.4% higher than the 997 kg/m^3 water reference used in this dataset.

Among the 4 fixed table records labeled Polymers, the nearest density to Plastic (PET) is Plastic (PVC) at 1380 kg/m^3: an absolute difference of 10 kg/m^3 (0.7% relative to Plastic (PET)). 2 records have a lower fixed density and 1 have a higher one. The observed range in this labeled group is Plastic (HDPE) at 950 kg/m^3 to Plastic (PVC) at 1380 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.

For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 3.085221 cup (US) per kg.

The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.

Questions & answers

Frequently Asked Questions

How much cup (US) is 1 kg of Plastic (PET)?

1 kg of Plastic (PET) equals 3.085221 cup (US) with the fixed density basis used here.

What density is used for Plastic (PET)?

Plastic (PET) uses a fixed density of 1370 kg/m^3.

Is there a reverse page with the same density basis?

Yes. Use the mirror page (US Cups to Kilograms for Plastic (PET)) to convert in the opposite direction with the same fixed density basis.