Short Tons (US) to Cubic Meters for Methanol
Snapshot
For Methanol, 1 Short Ton (US) equals about 1.145435 Cubic Meters.
- Material basis: Methanol at 792 kg/m^3.
- Example: For 0.1 Short Tons (US) of Methanol, the result is 0.114544 Cubic Meters.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
1.145435 Cubic Meters (Methanol)
SwitchAPI and AI agent access
Short Tons (US) to Cubic Meters for Methanol. Material: methanol.
Machine-readable identifiers
- Conversion family
material-density- Source unit
short_ton_us- Target unit
cubic_meter- Material
methanol
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "short_ton_us",
"to": "cubic_meter",
"material": "methanol"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "short_ton_us",
"to": "cubic_meter",
"result": {
"raw": 1.14543527778,
"display": "1.145435"
},
"canonicalPath": "/material-density/short-tons-to-cubic-meters/methanol/"
}
}Explanation
Short Tons (US) of Methanol convert to cubic meters using one fixed density basis of 792 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Typical pure methanol density near room temperature.
Common Conversion Values
| Short Tons (US) (Methanol) | Cubic Meters (Methanol) |
|---|---|
| 0.1 | 0.114544 |
| 1/4 | 0.286359 |
| 1/2 | 0.572718 |
| 1 | 1.145435 |
| 2 | 2.290871 |
| 5 | 5.727176 |
| 10 | 11.454353 |
| 25 | 28.635882 |
| 50 | 57.271764 |
| 100 | 114.543528 |
Methodology
Methanol density and calculation basis
Evidence status: blocked.
Methanol density requires a documented purity and temperature.
temperature: 20 °C entry; page also repeats 0.791 at 25 °C
concentration: Anhydrous methanol, ≥99.75%
Source basis: Merck / Sigma-Aldrich, Methanol PMC1105, anhydrous, ≥99.75%. Product properties: density (two temperature entries). https://www.sigmaaldrich.com/US/en/product/sial/pmc1105 Applicability: conditional-comparison.
Review 792 versus reported 791 kg/m³; original conditions and source conflict unresolved.
Listing has two temperatures for the same value; not an independent temperature series.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 1.145435 m^3 per ton (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.