Short Tons (US) to Cubic Meters for Kerosene
Snapshot
For Kerosene, 1 Short Ton (US) equals about 1.119981 Cubic Meters.
- Material basis: Kerosene at 810 kg/m^3.
- Example: For 0.1 Short Tons (US) of Kerosene, the result is 0.111998 Cubic Meters.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
1.119981 Cubic Meters (Kerosene)
SwitchAPI and AI agent access
Short Tons (US) to Cubic Meters for Kerosene. Material: kerosene.
Machine-readable identifiers
- Conversion family
material-density- Source unit
short_ton_us- Target unit
cubic_meter- Material
kerosene
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "short_ton_us",
"to": "cubic_meter",
"material": "kerosene"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "short_ton_us",
"to": "cubic_meter",
"result": {
"raw": 1.11998116049,
"display": "1.119981"
},
"canonicalPath": "/material-density/short-tons-to-cubic-meters/kerosene/"
}
}Explanation
Short Tons (US) of Kerosene convert to cubic meters using one fixed density basis of 810 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative kerosene density near room temperature.
Common Conversion Values
| Short Tons (US) (Kerosene) | Cubic Meters (Kerosene) |
|---|---|
| 0.1 | 0.111998 |
| 1/4 | 0.279995 |
| 1/2 | 0.559991 |
| 1 | 1.119981 |
| 2 | 2.239962 |
| 5 | 5.599906 |
| 10 | 11.199812 |
| 25 | 27.999529 |
| 50 | 55.999058 |
| 100 | 111.998116 |
Methodology
Kerosene density and calculation basis
Evidence status: needs-review.
Kerosene density depends on fuel specification and temperature.
temperature: 20 °C
grade: Illuminating kerosene, TotalEnergies Kenya
Source basis: TotalEnergies Kenya, Illuminating kerosene specification. Illuminating kerosene specification: density. https://totalenergies.ke/corporate-solutions/fuels/kerosene Applicability: conditional-comparison.
Establish grade and a representative density, not only a maximum.
Only an upper limit; does not establish a representative value.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 1.119981 m^3 per ton (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.