Solution ConcentrationParts per Million to Moles per Liter

Sodium Thiosulfate Pentahydrate Parts per Million to Moles per Liter

Source: Solution concentration reference model (Fixed molar masses (g/mol), SI concentration definitions, and dilute aqueous approximations where ppm ≈ mg/L and ppb ≈ ug/L.)

Methodology·How We Verify

Snapshot

1 Parts per Million equals 0.000004029334 Moles per Liter. Conversion Encyclopedia keeps one fixed solute basis on this page so the calculator, common values, and reverse page stay aligned.

Solute basis: Sodium Thiosulfate Pentahydrate with one fixed g/L normalization path for this page.
Example: For 0.1 Parts per Million, the result equals 4.03e-7 Moles per Liter.
Source basis: Solution concentration reference model.

Use the interactive calculator below for custom values and the common-value table for quick checks.

Interactive conversion

Converter Calculator

0.000004029334 Moles per Liter (Sodium Thiosulfate Pentahydrate)

Switch

Machine access

Available to apps and AI agents

Sodium Thiosulfate Pentahydrate Parts per Million to Moles per Liter can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The sodium-thiosulfate-pentahydrate identifier specifies the solute used by the same concentration calculation shown by the calculator.

Machine-readable identifiers

Conversion family: solution-concentration
Source unit: parts_per_million
Target unit: moles_per_liter
Solute: sodium-thiosulfate-pentahydrate

The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.

Example API request and response

POST /api/v1/convert

Request

{
  "family": "solution-concentration",
  "value": 1,
  "from": "parts_per_million",
  "to": "moles_per_liter",
  "solute": "sodium-thiosulfate-pentahydrate"
}

Essential response

{
  "ok": true,
  "conversion": {
    "family": "solution-concentration",
    "value": 1,
    "from": "parts_per_million",
    "to": "moles_per_liter",
    "result": {
      "raw": 0.00000402933354823,
      "display": "0.000004029334"
    },
    "canonicalPath": "/solution-concentration/parts-per-million-to-moles-per-liter/sodium-thiosulfate-pentahydrate/"
  }
}

Full API documentation

Explanation

For Sodium Thiosulfate Pentahydrate, g/L is the base reference and molar mass is 248.18 g/mol. ppm -> g/L via the dilute aqueous approximation: 1 ppm ~= 1 mg/l. g/L -> mol/L via the uses solute molar mass (g/mol). Combined factor: 1 ppm = 0.00000402933354823 mol/L. Sodium Thiosulfate Pentahydrate keeps one fixed solution-concentration basis, so the snapshot, calculator, common values, and mirror route stay aligned.

Dechlorination reagent reference. When molar units are involved, the same molar-mass assumption stays constant rather than switching reference values between blocks.

Method & Solute Basis

Method basis: this conversion runs through grams per liter and uses the molar mass of Sodium Thiosulfate Pentahydrate whenever a molar unit is involved.
Solute reference: Sodium Thiosulfate Pentahydrate. The page keeps one fixed g/L normalization path for this solute.
Consistency rule: calculator output and table values use the same constants and rounding policy.
Source: Solution concentration reference model (Fixed molar masses (g/mol), SI concentration definitions, and dilute aqueous approximations where ppm ≈ mg/L and ppb ≈ ug/L.)

Common Conversion Values

Parts per Million (Sodium Thiosulfate Pentahydrate)	Moles per Liter (Sodium Thiosulfate Pentahydrate)
0.1	4.03e-7
0.25	0.000001007333
0.5	0.000002014667
1	0.000004029334
2	0.000008058667
5	0.000020146668
10	0.000040293335
25	0.000100733339
50	0.000201466677
100	0.000402933355

Questions & answers

Frequently Asked Questions

How many mol/L is 1 ppm of Sodium Thiosulfate Pentahydrate?

1 ppm of Sodium Thiosulfate Pentahydrate equals 0.000004029334 mol/L in this solution-concentration converter.

How many mol/L is 10 ppm of Sodium Thiosulfate Pentahydrate?

10 ppm of Sodium Thiosulfate Pentahydrate is 0.000040293335 mol/L with the fixed solute basis used here.

What factor is used for Sodium Thiosulfate Pentahydrate ppm to mol/L?

Sodium Thiosulfate Pentahydrate keeps one fixed ppm-to-mol/L factor so the direct answer, calculator, and table stay aligned. For Sodium Thiosulfate Pentahydrate, the page uses a molar mass of 248.18 g/mol.

Is there a reverse page for Sodium Thiosulfate Pentahydrate?

Use the mirror Moles per Liter to Parts per Million page.