Solution ConcentrationParts per Million to Moles per Liter

EDTA Disodium Dihydrate Parts per Million to Moles per Liter

Source: Solution concentration reference model (Fixed molar masses (g/mol), SI concentration definitions, and dilute aqueous approximations where ppm ≈ mg/L and ppb ≈ ug/L.)

Methodology·How We Verify

Snapshot

1 Parts per Million equals 0.000002686439 Moles per Liter. Conversion Encyclopedia keeps one fixed solute basis on this page so the calculator, common values, and reverse page stay aligned.

Solute basis: EDTA Disodium Dihydrate with one fixed g/L normalization path for this page.
Example: For 0.1 Parts per Million, the result equals 2.69e-7 Moles per Liter.
Source basis: Solution concentration reference model.

Use the interactive calculator below for custom values and the common-value table for quick checks.

Interactive conversion

Converter Calculator

0.000002686439 Moles per Liter (EDTA Disodium Dihydrate)

Switch

Machine access

Available to apps and AI agents

EDTA Disodium Dihydrate Parts per Million to Moles per Liter can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The edta-disodium-dihydrate identifier specifies the solute used by the same concentration calculation shown by the calculator.

Machine-readable identifiers

Conversion family: solution-concentration
Source unit: parts_per_million
Target unit: moles_per_liter
Solute: edta-disodium-dihydrate

The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.

Example API request and response

POST /api/v1/convert

Request

{
  "family": "solution-concentration",
  "value": 1,
  "from": "parts_per_million",
  "to": "moles_per_liter",
  "solute": "edta-disodium-dihydrate"
}

Essential response

{
  "ok": true,
  "conversion": {
    "family": "solution-concentration",
    "value": 1,
    "from": "parts_per_million",
    "to": "moles_per_liter",
    "result": {
      "raw": 0.00000268643885665,
      "display": "0.000002686439"
    },
    "canonicalPath": "/solution-concentration/parts-per-million-to-moles-per-liter/edta-disodium-dihydrate/"
  }
}

Full API documentation

Explanation

For EDTA Disodium Dihydrate, g/L is the base reference and molar mass is 372.24 g/mol. ppm -> g/L via the dilute aqueous approximation: 1 ppm ~= 1 mg/l. g/L -> mol/L via the uses solute molar mass (g/mol). Combined factor: 1 ppm = 0.00000268643885665 mol/L. EDTA Disodium Dihydrate keeps one fixed solution-concentration basis, so the snapshot, calculator, common values, and mirror route stay aligned.

Chelating agent reference. When molar units are involved, the same molar-mass assumption stays constant rather than switching reference values between blocks.

Method & Solute Basis

Method basis: this conversion runs through grams per liter and uses the molar mass of EDTA Disodium Dihydrate whenever a molar unit is involved.
Solute reference: EDTA Disodium Dihydrate. The page keeps one fixed g/L normalization path for this solute.
Consistency rule: calculator output and table values use the same constants and rounding policy.
Source: Solution concentration reference model (Fixed molar masses (g/mol), SI concentration definitions, and dilute aqueous approximations where ppm ≈ mg/L and ppb ≈ ug/L.)

Common Conversion Values

Parts per Million (EDTA Disodium Dihydrate)	Moles per Liter (EDTA Disodium Dihydrate)
0.1	2.69e-7
0.25	6.72e-7
0.5	0.000001343219
1	0.000002686439
2	0.000005372878
5	0.000013432194
10	0.000026864389
25	0.000067160971
50	0.000134321943
100	0.000268643886

Questions & answers

Frequently Asked Questions

How many mol/L is 1 ppm of EDTA Disodium Dihydrate?

1 ppm of EDTA Disodium Dihydrate equals 0.000002686439 mol/L in this solution-concentration converter.

How many mol/L is 10 ppm of EDTA Disodium Dihydrate?

10 ppm of EDTA Disodium Dihydrate is 0.000026864389 mol/L with the fixed solute basis used here.

What factor is used for EDTA Disodium Dihydrate ppm to mol/L?

EDTA Disodium Dihydrate keeps one fixed ppm-to-mol/L factor so the direct answer, calculator, and table stay aligned. For EDTA Disodium Dihydrate, the page uses a molar mass of 372.24 g/mol.

Is there a reverse page for EDTA Disodium Dihydrate?

Use the mirror Moles per Liter to Parts per Million page.