US Quarts to Short Tons (US) for Plastic (HDPE)
Snapshot
For Plastic (HDPE), 1 US Quart equals about 0.000991 Short Tons (US).
- Material basis: Plastic (HDPE) at 950 kg/m^3.
- Example: For 0.1 US Quarts of Plastic (HDPE), the result is 0.000099 Short Tons (US).
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.000991 Short Tons (US) (Plastic (HDPE))
SwitchAPI and AI agent access
US Quarts to Short Tons (US) for Plastic (HDPE). Material: plastic-hdpe.
Machine-readable identifiers
- Conversion family
material-density- Source unit
quart_us- Target unit
short_ton_us- Material
plastic-hdpe
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "quart_us",
"to": "short_ton_us",
"material": "plastic-hdpe"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "quart_us",
"to": "short_ton_us",
"result": {
"raw": 0.000991016778677,
"display": "0.000991"
},
"canonicalPath": "/material-density/us-quarts-to-short-tons/plastic-hdpe/"
}
}Explanation
US Quarts of Plastic (HDPE) convert to short tons (us) using one fixed density basis of 950 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Typical high-density polyethylene density.
Common Conversion Values
| US Quarts (Plastic (HDPE)) | Short Tons (US) (Plastic (HDPE)) |
|---|---|
| 0.1 | 0.000099 |
| 1/4 | 0.000248 |
| 1/2 | 0.000496 |
| 1 | 0.000991 |
| 2 | 0.001982 |
| 5 | 0.004955 |
| 10 | 0.00991 |
| 25 | 0.024775 |
| 50 | 0.049551 |
| 100 | 0.099102 |
Methodology
Plastic (HDPE) density and calculation basis
Evidence status: publishable.
Representative HDPE material density, supported by the FI0750 grade; grades vary.
grade: HDPE FI0750 resin for blown film
Source basis: SABIC, Polymers product portfolio: HDPE blown film. PDF p.3, HDPE blown film: FI0750 row. https://www.sabic.com/en/Images/Polymers-All-Products_tcm1010-42650.pdf Applicability: adopted-context.
Density temperature not stated; melt-flow test temperature must not be reused as density temperature.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00099102 ton (US) per qt (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.