US Quarts to Metric Tons for Plastic (PVC)
Snapshot
For Plastic (PVC), 1 US Quart equals about 0.001306 Metric Tons. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Plastic (PVC) at 1,380 kg/m^3.
- Example: For 0.1 US Quarts of Plastic (PVC), the result is 0.000131 Metric Tons.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Interactive conversion
Converter Calculator
0.001306 Metric Tons (Plastic (PVC))
SwitchMachine access
Available to apps and AI agents
US Quarts to Metric Tons for Plastic (PVC) can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The plastic-pvc identifier tells the conversion engine which material record to use for the same calculation shown by the calculator.
Machine-readable identifiers
- Conversion family
material-density- Source unit
quart_us- Target unit
metric_ton- Material
plastic-pvc
The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "quart_us",
"to": "metric_ton",
"material": "plastic-pvc"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "quart_us",
"to": "metric_ton",
"result": {
"raw": 0.00130596706548,
"display": "0.001306"
},
"canonicalPath": "/material-density/us-quarts-to-metric-tons/plastic-pvc/"
}
}Explanation
US Quarts of Plastic (PVC) convert to metric tons using one fixed density basis of 1380 kg/m^3. The same density model is used in the calculator, common values, and mirror route so weight, mass, and volume checks stay aligned.
Representative rigid PVC density.
Common Conversion Values
| US Quarts (Plastic (PVC)) | Metric Tons (Plastic (PVC)) |
|---|---|
| 0.1 | 0.000131 |
| 0.25 | 0.000326 |
| 0.5 | 0.000653 |
| 1 | 0.001306 |
| 2 | 0.002612 |
| 5 | 0.00653 |
| 10 | 0.01306 |
| 25 | 0.032649 |
| 50 | 0.065298 |
| 100 | 0.130597 |
Methodology
Plastic (PVC) density and calculation basis
Plastic (PVC) is represented in this table by a fixed reference density of 1380 kg/m^3, equivalent to 1.38 g/cm^3. Representative rigid PVC density.
At this fixed reference, 1 liter of Plastic (PVC) corresponds to 1.38 kg, while 1 kg corresponds to 0.724638 liters. Its table density is 38.4% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 4 fixed table records labeled Polymers, the nearest density to Plastic (PVC) is Plastic (PET) at 1370 kg/m^3: an absolute difference of 10 kg/m^3 (0.7% relative to Plastic (PVC)). 3 records have a lower fixed density and 0 have a higher one. The observed range in this labeled group is Plastic (HDPE) at 950 kg/m^3 to Plastic (PVC) at 1380 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00130597 t per qt (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Questions & answers
Frequently Asked Questions
How much t is 1 qt (US) of Plastic (PVC)?
1 qt (US) of Plastic (PVC) equals 0.00130597 t with the fixed density basis used here.
What density is used for Plastic (PVC)?
Plastic (PVC) uses a fixed density of 1380 kg/m^3.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (Metric Tons to US Quarts for Plastic (PVC)) to convert in the opposite direction with the same fixed density basis.