US Quarts to Metric Tons for Cement Powder
Snapshot
For Cement Powder, 1 US Quart equals about 0.001363 Metric Tons.
- Material basis: Cement Powder at 1,440 kg/m^3.
- Example: For 0.1 US Quarts of Cement Powder, the result is 0.000136 Metric Tons.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.001363 Metric Tons (Cement Powder)
SwitchAPI and AI agent access
US Quarts to Metric Tons for Cement Powder. Material: cement-powder.
Machine-readable identifiers
- Conversion family
material-density- Source unit
quart_us- Target unit
metric_ton- Material
cement-powder
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "quart_us",
"to": "metric_ton",
"material": "cement-powder"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "quart_us",
"to": "metric_ton",
"result": {
"raw": 0.00136274824224,
"display": "0.001363"
},
"canonicalPath": "/material-density/us-quarts-to-metric-tons/cement-powder/"
}
}Explanation
US Quarts of Cement Powder convert to metric tons using one fixed density basis of 1440 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Approximate loose bulk density for cement powder.
Common Conversion Values
| US Quarts (Cement Powder) | Metric Tons (Cement Powder) |
|---|---|
| 0.1 | 0.000136 |
| 1/4 | 0.000341 |
| 1/2 | 0.000681 |
| 1 | 0.001363 |
| 2 | 0.002725 |
| 5 | 0.006814 |
| 10 | 0.013627 |
| 25 | 0.034069 |
| 50 | 0.068137 |
| 100 | 0.136275 |
Methodology
Cement Powder density and calculation basis
Evidence status: needs-review.
Bulk density of cement powder depends on aeration and packing.
grade: CEM I 42.5 R
state: Cement powder
Source basis: Breedon Cement, CEM I 42.5 R data sheet, 2026-03-23. Physical properties: bulk density (distinct from specific density). https://www.breedongroup.com/content/dam/breedon/corporate/documents/products-services/ireland/cement/2026/Data%20Sheet%20CEM%20I%2042%2C5%20R.pdf Applicability: conditional-comparison.
Establish packing state and cement grade; do not substitute particle density.
Loose/packed method not stated. Specific density is separately 3050–3200 kg/m³ and is not the bulk comparison.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00136275 t per qt (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.