US Quarts to Metric Tons for Brass
Snapshot
For Brass, 1 US Quart equals about 0.008044 Metric Tons. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Brass at 8,500 kg/m^3.
- Example: For 0.1 US Quarts of Brass, the result is 0.000804 Metric Tons.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Interactive conversion
Converter Calculator
0.008044 Metric Tons (Brass)
SwitchMachine access
Available to apps and AI agents
US Quarts to Metric Tons for Brass can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The brass identifier tells the conversion engine which material record to use for the same calculation shown by the calculator.
Machine-readable identifiers
- Conversion family
material-density- Source unit
quart_us- Target unit
metric_ton- Material
brass
The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "quart_us",
"to": "metric_ton",
"material": "brass"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "quart_us",
"to": "metric_ton",
"result": {
"raw": 0.008044000041,
"display": "0.008044"
},
"canonicalPath": "/material-density/us-quarts-to-metric-tons/brass/"
}
}Explanation
US Quarts of Brass convert to metric tons using one fixed density basis of 8500 kg/m^3. The same density model is used in the calculator, common values, and mirror route so weight, mass, and volume checks stay aligned.
Representative brass alloy density.
Common Conversion Values
| US Quarts (Brass) | Metric Tons (Brass) |
|---|---|
| 0.1 | 0.000804 |
| 0.25 | 0.002011 |
| 0.5 | 0.004022 |
| 1 | 0.008044 |
| 2 | 0.016088 |
| 5 | 0.04022 |
| 10 | 0.08044 |
| 25 | 0.2011 |
| 50 | 0.4022 |
| 100 | 0.8044 |
Methodology
Brass density and calculation basis
Brass is represented in this table by a fixed reference density of 8500 kg/m^3, equivalent to 8.5 g/cm^3. Representative brass alloy density.
At this fixed reference, 1 liter of Brass corresponds to 8.5 kg, while 1 kg corresponds to 0.117647 liters. Its table density is 752.6% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 13 fixed table records labeled Metals, the nearest density to Brass is Bronze at 8800 kg/m^3: an absolute difference of 300 kg/m^3 (3.5% relative to Brass). 6 records have a lower fixed density and 6 have a higher one. The observed range in this labeled group is Aluminum at 2700 kg/m^3 to Gold at 19320 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.008044 t per qt (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Questions & answers
Frequently Asked Questions
How much t is 1 qt (US) of Brass?
1 qt (US) of Brass equals 0.008044 t with the fixed density basis used here.
What density is used for Brass?
Brass uses a fixed density of 8500 kg/m^3.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (Metric Tons to US Quarts for Brass) to convert in the opposite direction with the same fixed density basis.