US Pints to Short Tons (US) for Stainless Steel
Snapshot
For Stainless Steel, 1 US Pint equals about 0.004173 Short Tons (US).
- Material basis: Stainless Steel at 8,000 kg/m^3.
- Example: For 0.1 US Pints of Stainless Steel, the result is 0.000417 Short Tons (US).
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.004173 Short Tons (US) (Stainless Steel)
SwitchAPI and AI agent access
US Pints to Short Tons (US) for Stainless Steel. Material: stainless-steel.
Machine-readable identifiers
- Conversion family
material-density- Source unit
pint_us- Target unit
short_ton_us- Material
stainless-steel
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "pint_us",
"to": "short_ton_us",
"material": "stainless-steel"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "pint_us",
"to": "short_ton_us",
"result": {
"raw": 0.00417270222601,
"display": "0.004173"
},
"canonicalPath": "/material-density/us-pints-to-short-tons/stainless-steel/"
}
}Explanation
US Pints of Stainless Steel convert to short tons (us) using one fixed density basis of 8000 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative stainless steel density.
Common Conversion Values
| US Pints (Stainless Steel) | Short Tons (US) (Stainless Steel) |
|---|---|
| 0.1 | 0.000417 |
| 1/4 | 0.001043 |
| 1/2 | 0.002086 |
| 1 | 0.004173 |
| 2 | 0.008345 |
| 5 | 0.020864 |
| 10 | 0.041727 |
| 25 | 0.104318 |
| 50 | 0.208635 |
| 100 | 0.41727 |
Methodology
Stainless Steel density and calculation basis
Evidence status: needs-review.
Stainless steel density varies by alloy grade.
grade: Core 304 stainless steel
Source basis: Outokumpu, Core range datasheet, physical properties. Table 7, Core 304 physical properties. https://www.outokumpu.com/-/media/files/products/core/outokumpu-core-range-datasheet.pdf Applicability: conditional-comparison.
Identify representative grade and its density conditions.
Do not generalize a grade-specific value to all stainless steels.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.0041727 ton (US) per pt (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.