US Pints to Ounces for Kerosene
Snapshot
For Kerosene, 1 US Pint equals about 13.519555 Ounces.
- Material basis: Kerosene at 810 kg/m^3.
- Example: For 0.1 US Pints of Kerosene, the result is 1.351956 Ounces.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
13.519555 Ounces (Kerosene)
SwitchAPI and AI agent access
US Pints to Ounces for Kerosene. Material: kerosene.
Machine-readable identifiers
- Conversion family
material-density- Source unit
pint_us- Target unit
ounce_weight- Material
kerosene
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "pint_us",
"to": "ounce_weight",
"material": "kerosene"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "pint_us",
"to": "ounce_weight",
"result": {
"raw": 13.5195552123,
"display": "13.519555"
},
"canonicalPath": "/material-density/us-pints-to-ounces/kerosene/"
}
}Explanation
US Pints of Kerosene convert to ounces using one fixed density basis of 810 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative kerosene density near room temperature.
Common Conversion Values
| US Pints (Kerosene) | Ounces (Kerosene) |
|---|---|
| 0.1 | 1.351956 |
| 1/4 | 3.379889 |
| 1/2 | 6.759778 |
| 1 | 13.519555 |
| 2 | 27.03911 |
| 5 | 67.597776 |
| 10 | 135.195552 |
| 25 | 337.98888 |
| 50 | 675.977761 |
| 100 | 1,351.955521 |
Methodology
Kerosene density and calculation basis
Evidence status: needs-review.
Kerosene density depends on fuel specification and temperature.
temperature: 20 °C
grade: Illuminating kerosene, TotalEnergies Kenya
Source basis: TotalEnergies Kenya, Illuminating kerosene specification. Illuminating kerosene specification: density. https://totalenergies.ke/corporate-solutions/fuels/kerosene Applicability: conditional-comparison.
Establish grade and a representative density, not only a maximum.
Only an upper limit; does not establish a representative value.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 13.519555 oz per pt (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.