US Pints to Metric Tons for Methanol
Snapshot
For Methanol, 1 US Pint equals about 0.000375 Metric Tons.
- Material basis: Methanol at 792 kg/m^3.
- Example: For 0.1 US Pints of Methanol, the result is 0.000037 Metric Tons.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.000375 Metric Tons (Methanol)
SwitchAPI and AI agent access
US Pints to Metric Tons for Methanol. Material: methanol.
Machine-readable identifiers
- Conversion family
material-density- Source unit
pint_us- Target unit
metric_ton- Material
methanol
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "pint_us",
"to": "metric_ton",
"material": "methanol"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "pint_us",
"to": "metric_ton",
"result": {
"raw": 0.000374755766616,
"display": "0.000375"
},
"canonicalPath": "/material-density/us-pints-to-metric-tons/methanol/"
}
}Explanation
US Pints of Methanol convert to metric tons using one fixed density basis of 792 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Typical pure methanol density near room temperature.
Common Conversion Values
| US Pints (Methanol) | Metric Tons (Methanol) |
|---|---|
| 0.1 | 0.000037 |
| 1/4 | 0.000094 |
| 1/2 | 0.000187 |
| 1 | 0.000375 |
| 2 | 0.00075 |
| 5 | 0.001874 |
| 10 | 0.003748 |
| 25 | 0.009369 |
| 50 | 0.018738 |
| 100 | 0.037476 |
Methodology
Methanol density and calculation basis
Evidence status: blocked.
Methanol density requires a documented purity and temperature.
temperature: 20 °C entry; page also repeats 0.791 at 25 °C
concentration: Anhydrous methanol, ≥99.75%
Source basis: Merck / Sigma-Aldrich, Methanol PMC1105, anhydrous, ≥99.75%. Product properties: density (two temperature entries). https://www.sigmaaldrich.com/US/en/product/sial/pmc1105 Applicability: conditional-comparison.
Review 792 versus reported 791 kg/m³; original conditions and source conflict unresolved.
Listing has two temperatures for the same value; not an independent temperature series.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00037476 t per pt (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.