Material DensityUS Pints to Kilograms

US Pints to Kilograms for Plastic (PVC)

Snapshot

For Plastic (PVC), 1 US Pint equals about 0.652984 Kilograms. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.

Material basis: Plastic (PVC) at 1,380 kg/m^3.
Example: For 0.1 US Pints of Plastic (PVC), the result is 0.065298 Kilograms.
Use the reverse page if you need the opposite direction with the same basis.

Use the interactive calculator below for custom values and the common-value table for quick checks.

Interactive conversion

Converter Calculator

0.652984 Kilograms (Plastic (PVC))

Switch

Machine access

Available to apps and AI agents

US Pints to Kilograms for Plastic (PVC) can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The plastic-pvc identifier tells the conversion engine which material record to use for the same calculation shown by the calculator.

Machine-readable identifiers

Conversion family: material-density
Source unit: pint_us
Target unit: kilogram
Material: plastic-pvc

The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.

Example API request and response

POST /api/v1/convert

Request

{
  "family": "material-density",
  "value": 1,
  "from": "pint_us",
  "to": "kilogram",
  "material": "plastic-pvc"
}

Essential response

{
  "ok": true,
  "conversion": {
    "family": "material-density",
    "value": 1,
    "from": "pint_us",
    "to": "kilogram",
    "result": {
      "raw": 0.65298353274,
      "display": "0.652984"
    },
    "canonicalPath": "/material-density/us-pints-to-kilograms/plastic-pvc/"
  }
}

Full API documentation

Explanation

US Pints of Plastic (PVC) convert to kilograms using one fixed density basis of 1380 kg/m^3. The same density model is used in the calculator, common values, and mirror route so weight, mass, and volume checks stay aligned.

Representative rigid PVC density.

Material & Method

Material used: Plastic (PVC). Method basis: density fixed at 1,380 kg/m^3 for every calculation on this page.
Applied relationship: 1 US Pint (volume) = 0.652984 Kilograms (mass) using the same material density basis.
Reference rule: snapshot, calculator, and common values table use the same material basis throughout the page.

Common Conversion Values

US Pints (Plastic (PVC))	Kilograms (Plastic (PVC))
0.1	0.065298
0.25	0.163246
0.5	0.326492
1	0.652984
2	1.305967
5	3.264918
10	6.529835
25	16.324588
50	32.649177
100	65.298353

Methodology

Plastic (PVC) density and calculation basis

Plastic (PVC) is represented in this table by a fixed reference density of 1380 kg/m^3, equivalent to 1.38 g/cm^3. Representative rigid PVC density.

At this fixed reference, 1 liter of Plastic (PVC) corresponds to 1.38 kg, while 1 kg corresponds to 0.724638 liters. Its table density is 38.4% higher than the 997 kg/m^3 water reference used in this dataset.

Among the 4 fixed table records labeled Polymers, the nearest density to Plastic (PVC) is Plastic (PET) at 1370 kg/m^3: an absolute difference of 10 kg/m^3 (0.7% relative to Plastic (PVC)). 3 records have a lower fixed density and 0 have a higher one. The observed range in this labeled group is Plastic (HDPE) at 950 kg/m^3 to Plastic (PVC) at 1380 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.

For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.652984 kg per pt (US).

The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.

Questions & answers

Frequently Asked Questions

How much kg is 1 pt (US) of Plastic (PVC)?

1 pt (US) of Plastic (PVC) equals 0.652984 kg with the fixed density basis used here.

What density is used for Plastic (PVC)?

Plastic (PVC) uses a fixed density of 1380 kg/m^3.

Is there a reverse page with the same density basis?

Yes. Use the mirror page (Kilograms to US Pints for Plastic (PVC)) to convert in the opposite direction with the same fixed density basis.