US Gallons to Short Tons (US) for Wood (Pine)
Snapshot
For Wood (Pine), 1 US Gallon equals about 0.002086 Short Tons (US).
- Material basis: Wood (Pine) at 500 kg/m^3.
- Example: For 0.1 US Gallons of Wood (Pine), the result is 0.000209 Short Tons (US).
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.002086 Short Tons (US) (Wood (Pine))
SwitchAPI and AI agent access
US Gallons to Short Tons (US) for Wood (Pine). Material: wood-pine.
Machine-readable identifiers
- Conversion family
material-density- Source unit
gallon_us- Target unit
short_ton_us- Material
wood-pine
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "gallon_us",
"to": "short_ton_us",
"material": "wood-pine"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "gallon_us",
"to": "short_ton_us",
"result": {
"raw": 0.002086351113,
"display": "0.002086"
},
"canonicalPath": "/material-density/us-gallons-to-short-tons/wood-pine/"
}
}Explanation
US Gallons of Wood (Pine) convert to short tons (us) using one fixed density basis of 500 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Typical softwood pine density by moisture and species.
Common Conversion Values
| US Gallons (Wood (Pine)) | Short Tons (US) (Wood (Pine)) |
|---|---|
| 0.1 | 0.000209 |
| 1/4 | 0.000522 |
| 1/2 | 0.001043 |
| 1 | 0.002086 |
| 2 | 0.004173 |
| 5 | 0.010432 |
| 10 | 0.020864 |
| 25 | 0.052159 |
| 50 | 0.104318 |
| 100 | 0.208635 |
Methodology
Wood (Pine) density and calculation basis
Evidence status: needs-review.
Wood density depends on species and moisture content.
method: Wood properties depend on species and moisture; dry-mass/green-volume specific gravity is distinguished
Source basis: USDA Forest Products Laboratory, Rowell (2005), Moisture Properties, chapter 4. Chapter 4: moisture, specific gravity, species table. https://research.fs.usda.gov/treesearch/download/22044.pdf Applicability: conditional-comparison.
Specify species, moisture and apparent-volume convention.
The 160 kg/m³ balsa example does not state its moisture basis; do not assign 12% moisture from a convention.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00208635 ton (US) per gal (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.