US Gallons to Short Tons (US) for Ethanol
Snapshot
For Ethanol, 1 US Gallon equals about 0.003292 Short Tons (US). Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Ethanol at 789 kg/m^3.
- Example: For 0.1 US Gallons of Ethanol, the result is 0.000329 Short Tons (US).
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Interactive conversion
Converter Calculator
0.003292 Short Tons (US) (Ethanol)
SwitchMachine access
Available to apps and AI agents
US Gallons to Short Tons (US) for Ethanol can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The ethanol identifier tells the conversion engine which material record to use for the same calculation shown by the calculator.
Machine-readable identifiers
- Conversion family
material-density- Source unit
gallon_us- Target unit
short_ton_us- Material
ethanol
The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "gallon_us",
"to": "short_ton_us",
"material": "ethanol"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "gallon_us",
"to": "short_ton_us",
"result": {
"raw": 0.00329226205632,
"display": "0.003292"
},
"canonicalPath": "/material-density/us-gallons-to-short-tons/ethanol/"
}
}Explanation
US Gallons of Ethanol convert to short tons (us) using one fixed density basis of 789 kg/m^3. The same density model is used in the calculator, common values, and mirror route so weight, mass, and volume checks stay aligned.
Typical pure ethanol density near room temperature.
Common Conversion Values
| US Gallons (Ethanol) | Short Tons (US) (Ethanol) |
|---|---|
| 0.1 | 0.000329 |
| 0.25 | 0.000823 |
| 0.5 | 0.001646 |
| 1 | 0.003292 |
| 2 | 0.006585 |
| 5 | 0.016461 |
| 10 | 0.032923 |
| 25 | 0.082307 |
| 50 | 0.164613 |
| 100 | 0.329226 |
Methodology
Ethanol density and calculation basis
Ethanol is represented in this table by a fixed reference density of 789 kg/m^3, equivalent to 0.789 g/cm^3. Typical pure ethanol density near room temperature.
At this fixed reference, 1 liter of Ethanol corresponds to 0.789 kg, while 1 kg corresponds to 1.267427 liters. Its table density is 20.9% lower than the 997 kg/m^3 water reference used in this dataset.
Among the 17 fixed table records labeled Liquids, the nearest density to Ethanol is Isopropyl Alcohol at 786 kg/m^3: an absolute difference of 3 kg/m^3 (0.4% relative to Ethanol). 3 records have a lower fixed density and 13 have a higher one. The observed range in this labeled group is Gasoline at 745 kg/m^3 to Honey at 1420 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00329226 ton (US) per gal (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Questions & answers
Frequently Asked Questions
How much ton (US) is 1 gal (US) of Ethanol?
1 gal (US) of Ethanol equals 0.00329226 ton (US) with the fixed density basis used here.
What density is used for Ethanol?
Ethanol uses a fixed density of 789 kg/m^3.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (Short Tons (US) to US Gallons for Ethanol) to convert in the opposite direction with the same fixed density basis.