US Gallons to Short Tons (US) for Brass
Snapshot
For Brass, 1 US Gallon equals about 0.035468 Short Tons (US).
- Material basis: Brass at 8,500 kg/m^3.
- Example: For 0.1 US Gallons of Brass, the result is 0.003547 Short Tons (US).
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.035468 Short Tons (US) (Brass)
SwitchAPI and AI agent access
US Gallons to Short Tons (US) for Brass. Material: brass.
Machine-readable identifiers
- Conversion family
material-density- Source unit
gallon_us- Target unit
short_ton_us- Material
brass
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "gallon_us",
"to": "short_ton_us",
"material": "brass"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "gallon_us",
"to": "short_ton_us",
"result": {
"raw": 0.0354679689211,
"display": "0.035468"
},
"canonicalPath": "/material-density/us-gallons-to-short-tons/brass/"
}
}Explanation
US Gallons of Brass convert to short tons (us) using one fixed density basis of 8500 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative brass alloy density.
Common Conversion Values
| US Gallons (Brass) | Short Tons (US) (Brass) |
|---|---|
| 0.1 | 0.003547 |
| 1/4 | 0.008867 |
| 1/2 | 0.017734 |
| 1 | 0.035468 |
| 2 | 0.070936 |
| 5 | 0.17734 |
| 10 | 0.35468 |
| 25 | 0.886699 |
| 50 | 1.773398 |
| 100 | 3.546797 |
Methodology
Brass density and calculation basis
Evidence status: needs-review.
Brass density varies by alloy composition.
temperature: Room temperature
grade: M30/M34 CuZn30
composition: Approximately 70% Cu, balance Zn
Source basis: Wieland, M30/M34: CuZn30 material data. Physical properties at room temperature: density. https://www.wieland.com/en/content/download/9804/file/M30-M34_EX_EN.pdf Applicability: conditional-comparison.
Identify representative alloy or a justified compositional interval.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.035468 ton (US) per gal (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.