US Gallons to Metric Tons for Diesel Fuel
Snapshot
For Diesel Fuel, 1 US Gallon equals about 0.003149 Metric Tons.
- Material basis: Diesel Fuel at 832 kg/m^3.
- Example: For 0.1 US Gallons of Diesel Fuel, the result is 0.000315 Metric Tons.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.003149 Metric Tons (Diesel Fuel)
SwitchAPI and AI agent access
US Gallons to Metric Tons for Diesel Fuel. Material: diesel-fuel.
Machine-readable identifiers
- Conversion family
material-density- Source unit
gallon_us- Target unit
metric_ton- Material
diesel-fuel
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "gallon_us",
"to": "metric_ton",
"material": "diesel-fuel"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "gallon_us",
"to": "metric_ton",
"result": {
"raw": 0.00314946260429,
"display": "0.003149"
},
"canonicalPath": "/material-density/us-gallons-to-metric-tons/diesel-fuel/"
}
}Explanation
US Gallons of Diesel Fuel convert to metric tons using one fixed density basis of 832 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative diesel density; blend-dependent.
Common Conversion Values
| US Gallons (Diesel Fuel) | Metric Tons (Diesel Fuel) |
|---|---|
| 0.1 | 0.000315 |
| 1/4 | 0.000787 |
| 1/2 | 0.001575 |
| 1 | 0.003149 |
| 2 | 0.006299 |
| 5 | 0.015747 |
| 10 | 0.031495 |
| 25 | 0.078737 |
| 50 | 0.157473 |
| 100 | 0.314946 |
Methodology
Diesel Fuel density and calculation basis
Evidence status: publishable.
Representative diesel density at 15 °C; the cited range applies to Futura DI-15/-25.
temperature: 15 °C
grade: Neste Futura Diesel DI-15/-25
method: EN ISO 12185 / 3675
Source basis: Neste, Futura Diesel -15/-25, DI-15/-25, TDS 2023-01-01. TDS 2023-01-01, density at 15 °C. https://www.neste.com/files/pdf/a77U5pQjbIyisUyXWHdAY-150312_en.pdf Applicability: adopted-context.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00314946 t per gal (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.