US Gallons to Metric Tons for Brass
Snapshot
For Brass, 1 US Gallon equals about 0.032176 Metric Tons.
- Material basis: Brass at 8,500 kg/m^3.
- Example: For 0.1 US Gallons of Brass, the result is 0.003218 Metric Tons.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.032176 Metric Tons (Brass)
SwitchAPI and AI agent access
US Gallons to Metric Tons for Brass. Material: brass.
Machine-readable identifiers
- Conversion family
material-density- Source unit
gallon_us- Target unit
metric_ton- Material
brass
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "gallon_us",
"to": "metric_ton",
"material": "brass"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "gallon_us",
"to": "metric_ton",
"result": {
"raw": 0.032176000164,
"display": "0.032176"
},
"canonicalPath": "/material-density/us-gallons-to-metric-tons/brass/"
}
}Explanation
US Gallons of Brass convert to metric tons using one fixed density basis of 8500 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative brass alloy density.
Common Conversion Values
| US Gallons (Brass) | Metric Tons (Brass) |
|---|---|
| 0.1 | 0.003218 |
| 1/4 | 0.008044 |
| 1/2 | 0.016088 |
| 1 | 0.032176 |
| 2 | 0.064352 |
| 5 | 0.16088 |
| 10 | 0.32176 |
| 25 | 0.8044 |
| 50 | 1.6088 |
| 100 | 3.2176 |
Methodology
Brass density and calculation basis
Evidence status: needs-review.
Brass density varies by alloy composition.
temperature: Room temperature
grade: M30/M34 CuZn30
composition: Approximately 70% Cu, balance Zn
Source basis: Wieland, M30/M34: CuZn30 material data. Physical properties at room temperature: density. https://www.wieland.com/en/content/download/9804/file/M30-M34_EX_EN.pdf Applicability: conditional-comparison.
Identify representative alloy or a justified compositional interval.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.032176 t per gal (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.