US Fluid Ounces to Short Tons (US) for Water
Snapshot
For Water, 1 US Fluid Ounce equals about 0.000033 Short Tons (US).
- Material basis: Water at 997 kg/m^3.
- Example: For 0.1 US Fluid Ounces of Water, the result is 0.000003 Short Tons (US).
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.000033 Short Tons (US) (Water)
SwitchAt the recorded density, 1 us fluid ounce of water converts to 0.000033 short tons (us).
API and AI agent access
US Fluid Ounces to Short Tons (US) for Water. Material: water.
Machine-readable identifiers
- Conversion family
material-density- Source unit
fluid_ounce_us- Target unit
short_ton_us- Material
water
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "fluid_ounce_us",
"to": "short_ton_us",
"material": "water"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "fluid_ounce_us",
"to": "short_ton_us",
"result": {
"raw": 0.0000325014384323,
"display": "0.000033"
},
"canonicalPath": "/material-density/us-fluid-ounces-to-short-tons/water/"
}
}Explanation
US Fluid Ounces of Water convert to short tons (us) using one fixed density basis of 997 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Approximate liquid water density near room temperature.
Common Conversion Values
| US Fluid Ounces (Water) | Short Tons (US) (Water) |
|---|---|
| 0.1 | 0.000003 |
| 1/4 | 0.000008 |
| 1/2 | 0.000016 |
| 1 | 0.000033 |
| 2 | 0.000065 |
| 5 | 0.000163 |
| 10 | 0.000325 |
| 25 | 0.000813 |
| 50 | 0.001625 |
| 100 | 0.00325 |
Methodology
Water density and calculation basis
Evidence status: publishable.
Approximate density of air-free water at 25 °C, rounded to the nearest kg/m³.
temperature: 25 °C
composition: Air-free water
Source basis: NIST, NISTIR 7383 (2019), Selected Procedures for Volumetric Calibrations. GLP 10, Table 2, printed p.6 / PDF p.15, 25 °C air-free row. https://nvlpubs.nist.gov/nistpubs/ir/2019/NIST.IR.7383-2019.pdf Applicability: adopted-context.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.0000325 ton (US) per fl oz (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.