US Cups to Metric Tons for Aluminum
Snapshot
For Aluminum, 1 US Cup equals about 0.000639 Metric Tons. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Aluminum at 2,700 kg/m^3.
- Example: For 0.1 US Cups of Aluminum, the result is 0.000064 Metric Tons.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Interactive conversion
Converter Calculator
0.000639 Metric Tons (Aluminum)
SwitchMachine access
Available to apps and AI agents
US Cups to Metric Tons for Aluminum can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The aluminum identifier tells the conversion engine which material record to use for the same calculation shown by the calculator.
Machine-readable identifiers
- Conversion family
material-density- Source unit
cup_us- Target unit
metric_ton- Material
aluminum
The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "cup_us",
"to": "metric_ton",
"material": "aluminum"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "cup_us",
"to": "metric_ton",
"result": {
"raw": 0.00063878823855,
"display": "0.000639"
},
"canonicalPath": "/material-density/us-cups-to-metric-tons/aluminum/"
}
}Explanation
US Cups of Aluminum convert to metric tons using one fixed density basis of 2700 kg/m^3. The same density model is used in the calculator, common values, and mirror route so weight, mass, and volume checks stay aligned.
Standard engineering density for aluminum.
Common Conversion Values
| US Cups (Aluminum) | Metric Tons (Aluminum) |
|---|---|
| 0.1 | 0.000064 |
| 0.25 | 0.00016 |
| 0.5 | 0.000319 |
| 1 | 0.000639 |
| 2 | 0.001278 |
| 5 | 0.003194 |
| 10 | 0.006388 |
| 25 | 0.01597 |
| 50 | 0.031939 |
| 100 | 0.063879 |
Methodology
Aluminum density and calculation basis
Aluminum is represented in this table by a fixed reference density of 2700 kg/m^3, equivalent to 2.7 g/cm^3. Standard engineering density for aluminum.
At this fixed reference, 1 liter of Aluminum corresponds to 2.7 kg, while 1 kg corresponds to 0.37037 liters. Its table density is 170.8% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 13 fixed table records labeled Metals, the nearest density to Aluminum is Titanium at 4500 kg/m^3: an absolute difference of 1800 kg/m^3 (66.7% relative to Aluminum). 0 records have a lower fixed density and 12 have a higher one. The observed range in this labeled group is Aluminum at 2700 kg/m^3 to Gold at 19320 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00063879 t per cup (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Questions & answers
Frequently Asked Questions
How much t is 1 cup (US) of Aluminum?
1 cup (US) of Aluminum equals 0.00063879 t with the fixed density basis used here.
What density is used for Aluminum?
Aluminum uses a fixed density of 2700 kg/m^3.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (Metric Tons to US Cups for Aluminum) to convert in the opposite direction with the same fixed density basis.