Material DensityShort Tons to US Gallons

Short Tons (US) to US Gallons for Cast Iron

Snapshot

For Cast Iron, 1 Short Ton (US) equals about 33.285119 US Gallons. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.

Material basis: Cast Iron at 7,200 kg/m^3.
Example: For 0.1 Short Tons (US) of Cast Iron, the result is 3.328512 US Gallons.
Use the reverse page if you need the opposite direction with the same basis.

Use the interactive calculator below for custom values and the common-value table for quick checks.

Interactive conversion

Converter Calculator

33.285119 US Gallons (Cast Iron)

Switch

Machine access

Available to apps and AI agents

Short Tons (US) to US Gallons for Cast Iron can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The cast-iron identifier tells the conversion engine which material record to use for the same calculation shown by the calculator.

Machine-readable identifiers

Conversion family: material-density
Source unit: short_ton_us
Target unit: gallon_us
Material: cast-iron

The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.

Example API request and response

POST /api/v1/convert

Request

{
  "family": "material-density",
  "value": 1,
  "from": "short_ton_us",
  "to": "gallon_us",
  "material": "cast-iron"
}

Essential response

{
  "ok": true,
  "conversion": {
    "family": "material-density",
    "value": 1,
    "from": "short_ton_us",
    "to": "gallon_us",
    "result": {
      "raw": 33.2851186991,
      "display": "33.285119"
    },
    "canonicalPath": "/material-density/short-tons-to-us-gallons/cast-iron/"
  }
}

Full API documentation

Explanation

Short Tons (US) of Cast Iron convert to us gallons using one fixed density basis of 7200 kg/m^3. The same density model is used in the calculator, common values, and mirror route so storage, batching, and material-planning checks stay aligned.

Representative cast iron density.

Material & Method

Material used: Cast Iron. Method basis: density fixed at 7,200 kg/m^3 for every calculation on this page.
Applied relationship: 1 Short Ton (US) (volume) = 33.285119 US Gallons (volume) using the same material density basis.
Reference rule: snapshot, calculator, and common values table use the same material basis throughout the page.

Common Conversion Values

Short Tons (US) (Cast Iron)	US Gallons (Cast Iron)
0.1	3.328512
0.25	8.32128
0.5	16.642559
1	33.285119
2	66.570237
5	166.425593
10	332.851187
25	832.127967
50	1,664.255935
100	3,328.51187

Methodology

Cast Iron density and calculation basis

Cast Iron is represented in this table by a fixed reference density of 7200 kg/m^3, equivalent to 7.2 g/cm^3. Representative cast iron density.

At this fixed reference, 1 liter of Cast Iron corresponds to 7.2 kg, while 1 kg corresponds to 0.138889 liters. Its table density is 622.2% higher than the 997 kg/m^3 water reference used in this dataset.

Among the 13 fixed table records labeled Metals, the nearest density to Cast Iron is Zinc at 7140 kg/m^3: an absolute difference of 60 kg/m^3 (0.8% relative to Cast Iron). 3 records have a lower fixed density and 9 have a higher one. The observed range in this labeled group is Aluminum at 2700 kg/m^3 to Gold at 19320 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.

For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 33.285119 gal (US) per ton (US).

The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.

Questions & answers

Frequently Asked Questions

How much gal (US) is 1 ton (US) of Cast Iron?

1 ton (US) of Cast Iron equals 33.285119 gal (US) with the fixed density basis used here.

What density is used for Cast Iron?

Cast Iron uses a fixed density of 7200 kg/m^3.

Is there a reverse page with the same density basis?

Yes. Use the mirror page (US Gallons to Short Tons (US) for Cast Iron) to convert in the opposite direction with the same fixed density basis.