Short Tons (US) to US Cups for Brass
Snapshot
For Brass, 1 Short Ton (US) equals about 451.111256 US Cups.
- Material basis: Brass at 8,500 kg/m^3.
- Example: For 0.1 Short Tons (US) of Brass, the result is 45.111126 US Cups.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
451.111256 US Cups (Brass)
SwitchAPI and AI agent access
Short Tons (US) to US Cups for Brass. Material: brass.
Machine-readable identifiers
- Conversion family
material-density- Source unit
short_ton_us- Target unit
cup_us- Material
brass
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "short_ton_us",
"to": "cup_us",
"material": "brass"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "short_ton_us",
"to": "cup_us",
"result": {
"raw": 451.111255781,
"display": "451.111256"
},
"canonicalPath": "/material-density/short-tons-to-us-cups/brass/"
}
}Explanation
Short Tons (US) of Brass convert to us cups using one fixed density basis of 8500 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative brass alloy density.
Common Conversion Values
| Short Tons (US) (Brass) | US Cups (Brass) |
|---|---|
| 0.1 | 45.111126 |
| 1/4 | 112.777814 |
| 1/2 | 225.555628 |
| 1 | 451.111256 |
| 2 | 902.222512 |
| 5 | 2,255.556279 |
| 10 | 4,511.112558 |
| 25 | 11,277.781395 |
| 50 | 22,555.562789 |
| 100 | 45,111.125578 |
Methodology
Brass density and calculation basis
Evidence status: needs-review.
Brass density varies by alloy composition.
temperature: Room temperature
grade: M30/M34 CuZn30
composition: Approximately 70% Cu, balance Zn
Source basis: Wieland, M30/M34: CuZn30 material data. Physical properties at room temperature: density. https://www.wieland.com/en/content/download/9804/file/M30-M34_EX_EN.pdf Applicability: conditional-comparison.
Identify representative alloy or a justified compositional interval.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 451.111256 cup (US) per ton (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.