Short Tons (US) to Cubic Meters for Asphalt
Snapshot
For Asphalt, 1 Short Ton (US) equals about 0.377994 Cubic Meters.
- Material basis: Asphalt at 2,400 kg/m^3.
- Example: For 0.1 Short Tons (US) of Asphalt, the result is 0.037799 Cubic Meters.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.377994 Cubic Meters (Asphalt)
SwitchAPI and AI agent access
Short Tons (US) to Cubic Meters for Asphalt. Material: asphalt.
Machine-readable identifiers
- Conversion family
material-density- Source unit
short_ton_us- Target unit
cubic_meter- Material
asphalt
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "short_ton_us",
"to": "cubic_meter",
"material": "asphalt"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "short_ton_us",
"to": "cubic_meter",
"result": {
"raw": 0.377993641667,
"display": "0.377994"
},
"canonicalPath": "/material-density/short-tons-to-cubic-meters/asphalt/"
}
}Explanation
Short Tons (US) of Asphalt convert to cubic meters using one fixed density basis of 2400 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Typical compacted asphalt density.
Common Conversion Values
| Short Tons (US) (Asphalt) | Cubic Meters (Asphalt) |
|---|---|
| 0.1 | 0.037799 |
| 1/4 | 0.094498 |
| 1/2 | 0.188997 |
| 1 | 0.377994 |
| 2 | 0.755987 |
| 5 | 1.889968 |
| 10 | 3.779936 |
| 25 | 9.449841 |
| 50 | 18.899682 |
| 100 | 37.799364 |
Methodology
Asphalt density and calculation basis
Evidence status: needs-review.
Asphalt mixture bulk density depends on composition and air voids.
state: Compacted asphalt concrete mixture
method: Bulk volume includes air voids; distinct from maximum theoretical density
Source basis: FHWA, LTPP materials characterization, FHWA-HRT-06-066, chapter 2. Asphalt concrete: bulk and maximum specific gravity. https://www.fhwa.dot.gov/publications/research/infrastructure/pavements/ltpp/06066/chapt2.cfm Applicability: context-only.
Establish mixture identity, void content and density method.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 0.377994 m^3 per ton (US).
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.