Material DensityPounds to US Pints

Pounds to US Pints for Ice

Snapshot

For Ice, 1 Pound equals about 1.045378 US Pints. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.

Material basis: Ice at 917 kg/m^3.
Example: For 0.1 Pounds of Ice, the result is 0.104538 US Pints.
Use the reverse page if you need the opposite direction with the same basis.

Use the interactive calculator below for custom values and the common-value table for quick checks.

Interactive conversion

Converter Calculator

1.045378 US Pints (Ice)

Switch

Machine access

Available to apps and AI agents

Pounds to US Pints for Ice can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The ice identifier tells the conversion engine which material record to use for the same calculation shown by the calculator.

Machine-readable identifiers

Conversion family: material-density
Source unit: pound
Target unit: pint_us
Material: ice

The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.

Example API request and response

POST /api/v1/convert

Request

{
  "family": "material-density",
  "value": 1,
  "from": "pound",
  "to": "pint_us",
  "material": "ice"
}

Essential response

{
  "ok": true,
  "conversion": {
    "family": "material-density",
    "value": 1,
    "from": "pound",
    "to": "pint_us",
    "result": {
      "raw": 1.04537777376,
      "display": "1.045378"
    },
    "canonicalPath": "/material-density/pounds-to-us-pints/ice/"
  }
}

Full API documentation

Explanation

Pounds of Ice convert to us pints using one fixed density basis of 917 kg/m^3. The same density model is used in the calculator, common values, and mirror route so storage, batching, and material-planning checks stay aligned.

Representative density for pure ice near 0 C.

Material & Method

Material used: Ice. Method basis: density fixed at 917 kg/m^3 for every calculation on this page.
Applied relationship: 1 Pound (mass) = 1.045378 US Pints (volume) using the same material density basis.
Reference rule: snapshot, calculator, and common values table use the same material basis throughout the page.

Common Conversion Values

Pounds (Ice)	US Pints (Ice)
0.1	0.104538
0.25	0.261344
0.5	0.522689
1	1.045378
2	2.090756
5	5.226889
10	10.453778
25	26.134444
50	52.268889
100	104.537777

Methodology

Ice density and calculation basis

Ice is represented in this table by a fixed reference density of 917 kg/m^3, equivalent to 0.917 g/cm^3. Representative density for pure ice near 0 C.

At this fixed reference, 1 liter of Ice corresponds to 0.917 kg, while 1 kg corresponds to 1.090513 liters. Its table density is 8.0% lower than the 997 kg/m^3 water reference used in this dataset.

Among the 17 fixed table records labeled Liquids, the nearest density to Ice is Vegetable Oil at 920 kg/m^3: an absolute difference of 3 kg/m^3 (0.3% relative to Ice). 8 records have a lower fixed density and 8 have a higher one. The observed range in this labeled group is Gasoline at 745 kg/m^3 to Honey at 1420 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.

For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 1.045378 pt (US) per lb.

The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.

Questions & answers

Frequently Asked Questions

How much pt (US) is 1 lb of Ice?

1 lb of Ice equals 1.045378 pt (US) with the fixed density basis used here.

What density is used for Ice?

Ice uses a fixed density of 917 kg/m^3.

Is there a reverse page with the same density basis?

Yes. Use the mirror page (US Pints to Pounds for Ice) to convert in the opposite direction with the same fixed density basis.