Pounds to US Pints for Cement Powder
Snapshot
For Cement Powder, 1 Pound equals about 0.665702 US Pints.
- Material basis: Cement Powder at 1,440 kg/m^3.
- Example: For 0.1 Pounds of Cement Powder, the result is 0.06657 US Pints.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.665702 US Pints (Cement Powder)
SwitchAPI and AI agent access
Pounds to US Pints for Cement Powder. Material: cement-powder.
Machine-readable identifiers
- Conversion family
material-density- Source unit
pound- Target unit
pint_us- Material
cement-powder
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "pound",
"to": "pint_us",
"material": "cement-powder"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "pound",
"to": "pint_us",
"result": {
"raw": 0.665702373983,
"display": "0.665702"
},
"canonicalPath": "/material-density/pounds-to-us-pints/cement-powder/"
}
}Explanation
Pounds of Cement Powder convert to us pints using one fixed density basis of 1440 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Approximate loose bulk density for cement powder.
Common Conversion Values
| Pounds (Cement Powder) | US Pints (Cement Powder) |
|---|---|
| 0.1 | 0.06657 |
| 1/4 | 0.166426 |
| 1/2 | 0.332851 |
| 1 | 0.665702 |
| 2 | 1.331405 |
| 5 | 3.328512 |
| 10 | 6.657024 |
| 25 | 16.642559 |
| 50 | 33.285119 |
| 100 | 66.570237 |
Methodology
Cement Powder density and calculation basis
Evidence status: needs-review.
Bulk density of cement powder depends on aeration and packing.
grade: CEM I 42.5 R
state: Cement powder
Source basis: Breedon Cement, CEM I 42.5 R data sheet, 2026-03-23. Physical properties: bulk density (distinct from specific density). https://www.breedongroup.com/content/dam/breedon/corporate/documents/products-services/ireland/cement/2026/Data%20Sheet%20CEM%20I%2042%2C5%20R.pdf Applicability: conditional-comparison.
Establish packing state and cement grade; do not substitute particle density.
Loose/packed method not stated. Specific density is separately 3050–3200 kg/m³ and is not the bulk comparison.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 0.665702 pt (US) per lb.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.