Pounds to US Pints for Brass
Snapshot
For Brass, 1 Pound equals about 0.112778 US Pints.
- Material basis: Brass at 8,500 kg/m^3.
- Example: For 0.1 Pounds of Brass, the result is 0.011278 US Pints.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.112778 US Pints (Brass)
SwitchAPI and AI agent access
Pounds to US Pints for Brass. Material: brass.
Machine-readable identifiers
- Conversion family
material-density- Source unit
pound- Target unit
pint_us- Material
brass
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "pound",
"to": "pint_us",
"material": "brass"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "pound",
"to": "pint_us",
"result": {
"raw": 0.112777813945,
"display": "0.112778"
},
"canonicalPath": "/material-density/pounds-to-us-pints/brass/"
}
}Explanation
Pounds of Brass convert to us pints using one fixed density basis of 8500 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative brass alloy density.
Common Conversion Values
| Pounds (Brass) | US Pints (Brass) |
|---|---|
| 0.1 | 0.011278 |
| 1/4 | 0.028194 |
| 1/2 | 0.056389 |
| 1 | 0.112778 |
| 2 | 0.225556 |
| 5 | 0.563889 |
| 10 | 1.127778 |
| 25 | 2.819445 |
| 50 | 5.638891 |
| 100 | 11.277781 |
Methodology
Brass density and calculation basis
Evidence status: needs-review.
Brass density varies by alloy composition.
temperature: Room temperature
grade: M30/M34 CuZn30
composition: Approximately 70% Cu, balance Zn
Source basis: Wieland, M30/M34: CuZn30 material data. Physical properties at room temperature: density. https://www.wieland.com/en/content/download/9804/file/M30-M34_EX_EN.pdf Applicability: conditional-comparison.
Identify representative alloy or a justified compositional interval.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 0.112778 pt (US) per lb.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.