Ounces to US Cups for Plastic (HDPE)
Snapshot
For Plastic (HDPE), 1 Ounce equals about 0.126133 US Cups.
- Material basis: Plastic (HDPE) at 950 kg/m^3.
- Example: For 0.1 Ounces of Plastic (HDPE), the result is 0.012613 US Cups.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.126133 US Cups (Plastic (HDPE))
SwitchAPI and AI agent access
Ounces to US Cups for Plastic (HDPE). Material: plastic-hdpe.
Machine-readable identifiers
- Conversion family
material-density- Source unit
ounce_weight- Target unit
cup_us- Material
plastic-hdpe
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "ounce_weight",
"to": "cup_us",
"material": "plastic-hdpe"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "ounce_weight",
"to": "cup_us",
"result": {
"raw": 0.126133081386,
"display": "0.126133"
},
"canonicalPath": "/material-density/ounces-to-us-cups/plastic-hdpe/"
}
}Explanation
Ounces of Plastic (HDPE) convert to us cups using one fixed density basis of 950 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Typical high-density polyethylene density.
Common Conversion Values
| Ounces (Plastic (HDPE)) | US Cups (Plastic (HDPE)) |
|---|---|
| 0.1 | 0.012613 |
| 1/4 | 0.031533 |
| 1/2 | 0.063067 |
| 1 | 0.126133 |
| 2 | 0.252266 |
| 5 | 0.630665 |
| 10 | 1.261331 |
| 25 | 3.153327 |
| 50 | 6.306654 |
| 100 | 12.613308 |
Methodology
Plastic (HDPE) density and calculation basis
Evidence status: publishable.
Representative HDPE material density, supported by the FI0750 grade; grades vary.
grade: HDPE FI0750 resin for blown film
Source basis: SABIC, Polymers product portfolio: HDPE blown film. PDF p.3, HDPE blown film: FI0750 row. https://www.sabic.com/en/Images/Polymers-All-Products_tcm1010-42650.pdf Applicability: adopted-context.
Density temperature not stated; melt-flow test temperature must not be reused as density temperature.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 0.126133 cup (US) per oz.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.