Metric Tons to US Gallons for Kerosene
Snapshot
For Kerosene, 1 Metric Ton equals about 326.138336 US Gallons.
- Material basis: Kerosene at 810 kg/m^3.
- Example: For 0.1 Metric Tons of Kerosene, the result is 32.613834 US Gallons.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
326.138336 US Gallons (Kerosene)
SwitchAPI and AI agent access
Metric Tons to US Gallons for Kerosene. Material: kerosene.
Machine-readable identifiers
- Conversion family
material-density- Source unit
metric_ton- Target unit
gallon_us- Material
kerosene
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "metric_ton",
"to": "gallon_us",
"material": "kerosene"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "metric_ton",
"to": "gallon_us",
"result": {
"raw": 326.138336245,
"display": "326.138336"
},
"canonicalPath": "/material-density/metric-tons-to-us-gallons/kerosene/"
}
}Explanation
Metric Tons of Kerosene convert to us gallons using one fixed density basis of 810 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative kerosene density near room temperature.
Common Conversion Values
| Metric Tons (Kerosene) | US Gallons (Kerosene) |
|---|---|
| 0.1 | 32.613834 |
| 1/4 | 81.534584 |
| 1/2 | 163.069168 |
| 1 | 326.138336 |
| 2 | 652.276672 |
| 5 | 1,630.691681 |
| 10 | 3,261.383362 |
| 25 | 8,153.458406 |
| 50 | 16,306.916812 |
| 100 | 32,613.833625 |
Methodology
Kerosene density and calculation basis
Evidence status: needs-review.
Kerosene density depends on fuel specification and temperature.
temperature: 20 °C
grade: Illuminating kerosene, TotalEnergies Kenya
Source basis: TotalEnergies Kenya, Illuminating kerosene specification. Illuminating kerosene specification: density. https://totalenergies.ke/corporate-solutions/fuels/kerosene Applicability: conditional-comparison.
Establish grade and a representative density, not only a maximum.
Only an upper limit; does not establish a representative value.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 326.138336 gal (US) per t.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.