Metric Tons to US Gallons for Asphalt
Snapshot
For Asphalt, 1 Metric Ton equals about 110.071688 US Gallons.
- Material basis: Asphalt at 2,400 kg/m^3.
- Example: For 0.1 Metric Tons of Asphalt, the result is 11.007169 US Gallons.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
110.071688 US Gallons (Asphalt)
SwitchAPI and AI agent access
Metric Tons to US Gallons for Asphalt. Material: asphalt.
Machine-readable identifiers
- Conversion family
material-density- Source unit
metric_ton- Target unit
gallon_us- Material
asphalt
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "metric_ton",
"to": "gallon_us",
"material": "asphalt"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "metric_ton",
"to": "gallon_us",
"result": {
"raw": 110.071688483,
"display": "110.071688"
},
"canonicalPath": "/material-density/metric-tons-to-us-gallons/asphalt/"
}
}Explanation
Metric Tons of Asphalt convert to us gallons using one fixed density basis of 2400 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Typical compacted asphalt density.
Common Conversion Values
| Metric Tons (Asphalt) | US Gallons (Asphalt) |
|---|---|
| 0.1 | 11.007169 |
| 1/4 | 27.517922 |
| 1/2 | 55.035844 |
| 1 | 110.071688 |
| 2 | 220.143377 |
| 5 | 550.358442 |
| 10 | 1,100.716885 |
| 25 | 2,751.792212 |
| 50 | 5,503.584424 |
| 100 | 11,007.168848 |
Methodology
Asphalt density and calculation basis
Evidence status: needs-review.
Asphalt mixture bulk density depends on composition and air voids.
state: Compacted asphalt concrete mixture
method: Bulk volume includes air voids; distinct from maximum theoretical density
Source basis: FHWA, LTPP materials characterization, FHWA-HRT-06-066, chapter 2. Asphalt concrete: bulk and maximum specific gravity. https://www.fhwa.dot.gov/publications/research/infrastructure/pavements/ltpp/06066/chapt2.cfm Applicability: context-only.
Establish mixture identity, void content and density method.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 110.071688 gal (US) per t.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.