Liters to Short Tons (US) for Olive Oil
Snapshot
For Olive Oil, 1 Liter equals about 0.001003 Short Tons (US).
- Material basis: Olive Oil at 910 kg/m^3.
- Example: For 0.1 Liters of Olive Oil, the result is 0.0001 Short Tons (US).
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.001003 Short Tons (US) (Olive Oil)
SwitchAt the recorded density, 1 liter of olive oil converts to 0.001003 short tons (us).
API and AI agent access
Liters to Short Tons (US) for Olive Oil. Material: olive-oil.
Machine-readable identifiers
- Conversion family
material-density- Source unit
liter- Target unit
short_ton_us- Material
olive-oil
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "liter",
"to": "short_ton_us",
"material": "olive-oil"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "liter",
"to": "short_ton_us",
"result": {
"raw": 0.00100310329294,
"display": "0.001003"
},
"canonicalPath": "/material-density/liters-to-short-tons/olive-oil/"
}
}Explanation
Liters of Olive Oil convert to short tons (us) using one fixed density basis of 910 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Typical edible olive oil density near room temperature.
Common Conversion Values
| Liters (Olive Oil) | Short Tons (US) (Olive Oil) |
|---|---|
| 0.1 | 0.0001 |
| 1/4 | 0.000251 |
| 1/2 | 0.000502 |
| 1 | 0.001003 |
| 2 | 0.002006 |
| 5 | 0.005016 |
| 10 | 0.010031 |
| 25 | 0.025078 |
| 50 | 0.050155 |
| 100 | 0.10031 |
Methodology
Olive Oil density and calculation basis
Evidence status: publishable.
Representative olive oil density at 20 °C; composition affects actual density.
temperature: Oil at 20 °C; reference water at 20 °C
composition: Virgin/refined olive oils in the cited standard
Source basis: FAO / Codex Alimentarius, Codex standards for fats and oils: archived compilation. Olive oil standard, §3.1.2.1 relative density. https://www.fao.org/4/y2774e/y2774e04.htm Applicability: adopted-context.
Historical specification; relative density is not g/ml.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.0010031 ton (US) per L.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.