Liters to Metric Tons for Cast Iron
Snapshot
For Cast Iron, 1 Liter equals about 0.0072 Metric Tons.
- Material basis: Cast Iron at 7,200 kg/m^3.
- Example: For 0.1 Liters of Cast Iron, the result is 0.00072 Metric Tons.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.0072 Metric Tons (Cast Iron)
SwitchAPI and AI agent access
Liters to Metric Tons for Cast Iron. Material: cast-iron.
Machine-readable identifiers
- Conversion family
material-density- Source unit
liter- Target unit
metric_ton- Material
cast-iron
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "liter",
"to": "metric_ton",
"material": "cast-iron"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "liter",
"to": "metric_ton",
"result": {
"raw": 0.0072,
"display": "0.0072"
},
"canonicalPath": "/material-density/liters-to-metric-tons/cast-iron/"
}
}Explanation
Liters of Cast Iron convert to metric tons using one fixed density basis of 7200 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative cast iron density.
Common Conversion Values
| Liters (Cast Iron) | Metric Tons (Cast Iron) |
|---|---|
| 0.1 | 0.00072 |
| 1/4 | 0.0018 |
| 1/2 | 0.0036 |
| 1 | 0.0072 |
| 2 | 0.0144 |
| 5 | 0.036 |
| 10 | 0.072 |
| 25 | 0.18 |
| 50 | 0.36 |
| 100 | 0.72 |
Methodology
Cast Iron density and calculation basis
Evidence status: publishable.
Representative gray cast iron density; ductile iron and other grades differ.
grade: Dura-Bar gray cast iron
Source basis: Dura-Bar, Density technical brief, 02/2019. Technical brief: gray iron versus ductile iron density. https://www.dura-bar.com/getmedia/811341e6-6541-48f9-b719-1d1d666a2bc8/dura-bar-density-0219.pdf?ext=.pdf Applicability: adopted-context.
Ductile iron has a separate 0.255 lb/in³ value; temperature not stated.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.0072 t per L.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.