Liters to Kilograms for Plastic (PVC)
Snapshot
For Plastic (PVC), 1 Liter equals about 1.38 Kilograms.
- Material basis: Plastic (PVC) at 1,380 kg/m^3.
- Example: For 0.1 Liters of Plastic (PVC), the result is 0.138 Kilograms.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
1.38 Kilograms (Plastic (PVC))
SwitchAPI and AI agent access
Liters to Kilograms for Plastic (PVC). Material: plastic-pvc.
Machine-readable identifiers
- Conversion family
material-density- Source unit
liter- Target unit
kilogram- Material
plastic-pvc
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "liter",
"to": "kilogram",
"material": "plastic-pvc"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "liter",
"to": "kilogram",
"result": {
"raw": 1.38,
"display": "1.38"
},
"canonicalPath": "/material-density/liters-to-kilograms/plastic-pvc/"
}
}Explanation
Liters of Plastic (PVC) convert to kilograms using one fixed density basis of 1380 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative rigid PVC density.
Common Conversion Values
| Liters (Plastic (PVC)) | Kilograms (Plastic (PVC)) |
|---|---|
| 0.1 | 0.138 |
| 1/4 | 0.345 |
| 1/2 | 0.69 |
| 1 | 1.38 |
| 2 | 2.76 |
| 5 | 6.9 |
| 10 | 13.8 |
| 25 | 34.5 |
| 50 | 69 |
| 100 | 138 |
Methodology
Plastic (PVC) density and calculation basis
Evidence status: needs-review.
PVC density depends on formulation and additives.
composition: PVC resin families and application-specific grades
Source basis: INEOS, PVC product families and grades. About: product types and grades. https://www.ineos.com/industry/products/polymers/pvc/ Applicability: context-only.
Obtain density evidence for an identified rigid PVC formulation.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 1.38 kg per L.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.