Kilograms to US Pints for Plastic (HDPE)
Snapshot
For Plastic (HDPE), 1 Kilogram equals about 2.224607 US Pints.
- Material basis: Plastic (HDPE) at 950 kg/m^3.
- Example: For 0.1 Kilograms of Plastic (HDPE), the result is 0.222461 US Pints.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
2.224607 US Pints (Plastic (HDPE))
SwitchAPI and AI agent access
Kilograms to US Pints for Plastic (HDPE). Material: plastic-hdpe.
Machine-readable identifiers
- Conversion family
material-density- Source unit
kilogram- Target unit
pint_us- Material
plastic-hdpe
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "kilogram",
"to": "pint_us",
"material": "plastic-hdpe"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "kilogram",
"to": "pint_us",
"result": {
"raw": 2.2246067567,
"display": "2.224607"
},
"canonicalPath": "/material-density/kilograms-to-us-pints/plastic-hdpe/"
}
}Explanation
Kilograms of Plastic (HDPE) convert to us pints using one fixed density basis of 950 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Typical high-density polyethylene density.
Common Conversion Values
| Kilograms (Plastic (HDPE)) | US Pints (Plastic (HDPE)) |
|---|---|
| 0.1 | 0.222461 |
| 1/4 | 0.556152 |
| 1/2 | 1.112303 |
| 1 | 2.224607 |
| 2 | 4.449214 |
| 5 | 11.123034 |
| 10 | 22.246068 |
| 25 | 55.615169 |
| 50 | 111.230338 |
| 100 | 222.460676 |
Methodology
Plastic (HDPE) density and calculation basis
Evidence status: publishable.
Representative HDPE material density, supported by the FI0750 grade; grades vary.
grade: HDPE FI0750 resin for blown film
Source basis: SABIC, Polymers product portfolio: HDPE blown film. PDF p.3, HDPE blown film: FI0750 row. https://www.sabic.com/en/Images/Polymers-All-Products_tcm1010-42650.pdf Applicability: adopted-context.
Density temperature not stated; melt-flow test temperature must not be reused as density temperature.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 2.224607 pt (US) per kg.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.