Kilograms to US Gallons for Brick
Snapshot
For Brick, 1 Kilogram equals about 0.146762 US Gallons. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Brick at 1,800 kg/m^3.
- Example: For 0.1 Kilograms of Brick, the result is 0.014676 US Gallons.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Interactive conversion
Converter Calculator
0.146762 US Gallons (Brick)
SwitchMachine access
Available to apps and AI agents
Kilograms to US Gallons for Brick can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The brick identifier tells the conversion engine which material record to use for the same calculation shown by the calculator.
Machine-readable identifiers
- Conversion family
material-density- Source unit
kilogram- Target unit
gallon_us- Material
brick
The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "kilogram",
"to": "gallon_us",
"material": "brick"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "kilogram",
"to": "gallon_us",
"result": {
"raw": 0.14676225131,
"display": "0.146762"
},
"canonicalPath": "/material-density/kilograms-to-us-gallons/brick/"
}
}Explanation
Kilograms of Brick convert to us gallons using one fixed density basis of 1800 kg/m^3. The same density model is used in the calculator, common values, and mirror route so storage, batching, and material-planning checks stay aligned.
Representative fired clay brick density.
Common Conversion Values
| Kilograms (Brick) | US Gallons (Brick) |
|---|---|
| 0.1 | 0.014676 |
| 0.25 | 0.036691 |
| 0.5 | 0.073381 |
| 1 | 0.146762 |
| 2 | 0.293525 |
| 5 | 0.733811 |
| 10 | 1.467623 |
| 25 | 3.669056 |
| 50 | 7.338113 |
| 100 | 14.676225 |
Methodology
Brick density and calculation basis
Brick is represented in this table by a fixed reference density of 1800 kg/m^3, equivalent to 1.8 g/cm^3. Representative fired clay brick density.
At this fixed reference, 1 liter of Brick corresponds to 1.8 kg, while 1 kg corresponds to 0.555556 liters. Its table density is 80.5% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 11 fixed table records labeled Construction materials, the nearest density to Brick is Gravel at 1700 kg/m^3: an absolute difference of 100 kg/m^3 (5.6% relative to Brick). 4 records have a lower fixed density and 6 have a higher one. The observed range in this labeled group is Topsoil at 1200 kg/m^3 to Granite at 2750 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 0.146762 gal (US) per kg.
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Questions & answers
Frequently Asked Questions
How much gal (US) is 1 kg of Brick?
1 kg of Brick equals 0.146762 gal (US) with the fixed density basis used here.
What density is used for Brick?
Brick uses a fixed density of 1800 kg/m^3.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (US Gallons to Kilograms for Brick) to convert in the opposite direction with the same fixed density basis.