Kilograms to Cubic Meters for Brass
Snapshot
For Brass, 1 Kilogram equals about 0.000118 Cubic Meters.
- Material basis: Brass at 8,500 kg/m^3.
- Example: For 0.1 Kilograms of Brass, the result is 0.000012 Cubic Meters.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.000118 Cubic Meters (Brass)
SwitchAPI and AI agent access
Kilograms to Cubic Meters for Brass. Material: brass.
Machine-readable identifiers
- Conversion family
material-density- Source unit
kilogram- Target unit
cubic_meter- Material
brass
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "kilogram",
"to": "cubic_meter",
"material": "brass"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "kilogram",
"to": "cubic_meter",
"result": {
"raw": 0.000117647058824,
"display": "0.000118"
},
"canonicalPath": "/material-density/kilograms-to-cubic-meters/brass/"
}
}Explanation
Kilograms of Brass convert to cubic meters using one fixed density basis of 8500 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative brass alloy density.
Common Conversion Values
| Kilograms (Brass) | Cubic Meters (Brass) |
|---|---|
| 0.1 | 0.000012 |
| 1/4 | 0.000029 |
| 1/2 | 0.000059 |
| 1 | 0.000118 |
| 2 | 0.000235 |
| 5 | 0.000588 |
| 10 | 0.001176 |
| 25 | 0.002941 |
| 50 | 0.005882 |
| 100 | 0.011765 |
Methodology
Brass density and calculation basis
Evidence status: needs-review.
Brass density varies by alloy composition.
temperature: Room temperature
grade: M30/M34 CuZn30
composition: Approximately 70% Cu, balance Zn
Source basis: Wieland, M30/M34: CuZn30 material data. Physical properties at room temperature: density. https://www.wieland.com/en/content/download/9804/file/M30-M34_EX_EN.pdf Applicability: conditional-comparison.
Identify representative alloy or a justified compositional interval.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 0.00011765 m^3 per kg.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.