Cubic Meters to Short Tons (US) for Honey
Snapshot
For Honey, 1 Cubic Meter equals about 1.565282 Short Tons (US).
- Material basis: Honey at 1,420 kg/m^3.
- Example: For 0.1 Cubic Meters of Honey, the result is 0.156528 Short Tons (US).
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
1.565282 Short Tons (US) (Honey)
SwitchAPI and AI agent access
Cubic Meters to Short Tons (US) for Honey. Material: honey.
Machine-readable identifiers
- Conversion family
material-density- Source unit
cubic_meter- Target unit
short_ton_us- Material
honey
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "cubic_meter",
"to": "short_ton_us",
"material": "honey"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "cubic_meter",
"to": "short_ton_us",
"result": {
"raw": 1.56528206151,
"display": "1.565282"
},
"canonicalPath": "/material-density/cubic-meters-to-short-tons/honey/"
}
}Explanation
Cubic Meters of Honey convert to short tons (us) using one fixed density basis of 1420 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative honey density; moisture content changes value.
Common Conversion Values
| Cubic Meters (Honey) | Short Tons (US) (Honey) |
|---|---|
| 0.1 | 0.156528 |
| 1/4 | 0.391321 |
| 1/2 | 0.782641 |
| 1 | 1.565282 |
| 2 | 3.130564 |
| 5 | 7.82641 |
| 10 | 15.652821 |
| 25 | 39.132052 |
| 50 | 78.264103 |
| 100 | 156.528206 |
Methodology
Honey density and calculation basis
Evidence status: needs-review.
Honey density depends strongly on water content and temperature.
temperature: 20 °C
moisture: 13–21% water (table endpoints)
Source basis: FAO, Value-added products from beekeeping, chapter 2. Table 2.4: true specific gravity versus water content. https://www.fao.org/4/w0076e/w0076e04.htm Applicability: context-only.
Identify moisture and the specific-gravity water reference or obtain direct mass-density evidence.
Reference-water temperature is not specified; do not treat this interval as g/ml.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 1.565282 ton (US) per m^3.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.