Cubic Meters to Short Tons (US) for Ethanol
Snapshot
For Ethanol, 1 Cubic Meter equals about 0.869724 Short Tons (US).
- Material basis: Ethanol at 789 kg/m^3.
- Example: For 0.1 Cubic Meters of Ethanol, the result is 0.086972 Short Tons (US).
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.869724 Short Tons (US) (Ethanol)
SwitchAPI and AI agent access
Cubic Meters to Short Tons (US) for Ethanol. Material: ethanol.
Machine-readable identifiers
- Conversion family
material-density- Source unit
cubic_meter- Target unit
short_ton_us- Material
ethanol
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "cubic_meter",
"to": "short_ton_us",
"material": "ethanol"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "cubic_meter",
"to": "short_ton_us",
"result": {
"raw": 0.869723624319,
"display": "0.869724"
},
"canonicalPath": "/material-density/cubic-meters-to-short-tons/ethanol/"
}
}Explanation
Cubic Meters of Ethanol convert to short tons (us) using one fixed density basis of 789 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Typical pure ethanol density near room temperature.
Common Conversion Values
| Cubic Meters (Ethanol) | Short Tons (US) (Ethanol) |
|---|---|
| 0.1 | 0.086972 |
| 1/4 | 0.217431 |
| 1/2 | 0.434862 |
| 1 | 0.869724 |
| 2 | 1.739447 |
| 5 | 4.348618 |
| 10 | 8.697236 |
| 25 | 21.743091 |
| 50 | 43.486181 |
| 100 | 86.972362 |
Methodology
Ethanol density and calculation basis
Evidence status: publishable.
Reference density for anhydrous ethanol at 20 °C; not for diluted alcoholic drinks.
temperature: 20 °C
concentration: Anhydrous ethanol, ≥99.5%, 200 proof
state: Liquid
Source basis: Merck / Sigma-Aldrich, Ethanol 459836, anhydrous, 200 proof, ≥99.5%. Properties: assay, form, density. https://www.sigmaaldrich.com/US/en/product/sial/459836 Applicability: adopted-context.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.869724 ton (US) per m^3.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.