Cubic Meters to Metric Tons for Wood (Pine)
Snapshot
For Wood (Pine), 1 Cubic Meter equals about 0.5 Metric Tons.
- Material basis: Wood (Pine) at 500 kg/m^3.
- Example: For 0.1 Cubic Meters of Wood (Pine), the result is 0.05 Metric Tons.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.5 Metric Tons (Wood (Pine))
SwitchAPI and AI agent access
Cubic Meters to Metric Tons for Wood (Pine). Material: wood-pine.
Machine-readable identifiers
- Conversion family
material-density- Source unit
cubic_meter- Target unit
metric_ton- Material
wood-pine
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "cubic_meter",
"to": "metric_ton",
"material": "wood-pine"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "cubic_meter",
"to": "metric_ton",
"result": {
"raw": 0.5,
"display": "0.5"
},
"canonicalPath": "/material-density/cubic-meters-to-metric-tons/wood-pine/"
}
}Explanation
Cubic Meters of Wood (Pine) convert to metric tons using one fixed density basis of 500 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Typical softwood pine density by moisture and species.
Common Conversion Values
| Cubic Meters (Wood (Pine)) | Metric Tons (Wood (Pine)) |
|---|---|
| 0.1 | 0.05 |
| 1/4 | 0.125 |
| 1/2 | 0.25 |
| 1 | 0.5 |
| 2 | 1 |
| 5 | 2.5 |
| 10 | 5 |
| 25 | 12.5 |
| 50 | 25 |
| 100 | 50 |
Methodology
Wood (Pine) density and calculation basis
Evidence status: needs-review.
Wood density depends on species and moisture content.
method: Wood properties depend on species and moisture; dry-mass/green-volume specific gravity is distinguished
Source basis: USDA Forest Products Laboratory, Rowell (2005), Moisture Properties, chapter 4. Chapter 4: moisture, specific gravity, species table. https://research.fs.usda.gov/treesearch/download/22044.pdf Applicability: conditional-comparison.
Specify species, moisture and apparent-volume convention.
The 160 kg/m³ balsa example does not state its moisture basis; do not assign 12% moisture from a convention.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.5 t per m^3.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.