Cubic Meters to Metric Tons for Steel (Carbon)
Snapshot
For Steel (Carbon), 1 Cubic Meter equals about 7.85 Metric Tons.
- Material basis: Steel (Carbon) at 7,850 kg/m^3.
- Example: For 0.1 Cubic Meters of Steel (Carbon), the result is 0.785 Metric Tons.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
7.85 Metric Tons (Steel (Carbon))
SwitchAPI and AI agent access
Cubic Meters to Metric Tons for Steel (Carbon). Material: steel-carbon.
Machine-readable identifiers
- Conversion family
material-density- Source unit
cubic_meter- Target unit
metric_ton- Material
steel-carbon
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "cubic_meter",
"to": "metric_ton",
"material": "steel-carbon"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "cubic_meter",
"to": "metric_ton",
"result": {
"raw": 7.85,
"display": "7.85"
},
"canonicalPath": "/material-density/cubic-meters-to-metric-tons/steel-carbon/"
}
}Explanation
Cubic Meters of Steel (Carbon) convert to metric tons using one fixed density basis of 7850 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Standard engineering density for carbon steel.
Common Conversion Values
| Cubic Meters (Steel (Carbon)) | Metric Tons (Steel (Carbon)) |
|---|---|
| 0.1 | 0.785 |
| 1/4 | 1.9625 |
| 1/2 | 3.925 |
| 1 | 7.85 |
| 2 | 15.7 |
| 5 | 39.25 |
| 10 | 78.5 |
| 25 | 196.25 |
| 50 | 392.5 |
| 100 | 785 |
Methodology
Steel (Carbon) density and calculation basis
Evidence status: publishable.
Nominal density adopted for structural steel calculations; an engineering reference value.
grade: Structural steel engineering model
method: Constant density assumption in structural fire design
Source basis: European Commission JRC, Structural Fire Design — Worked Examples (2014), EUR 26698 EN. PDF p.85, Figure 2.4.7: density of steel. https://eurocodes.jrc.ec.europa.eu/sites/default/files/2022-06/2012_11_WS_fire.pdf Applicability: adopted-context.
A design assumption, not evidence that physical density is invariant with temperature.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 7.85 t per m^3.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.