Cubic Centimeters to Short Tons (US) for Wood (Pine)
Snapshot
For Wood (Pine), 1 Cubic Centimeter equals about 5.51e-7 Short Tons (US).
- Material basis: Wood (Pine) at 500 kg/m^3.
- Example: For 0.1 Cubic Centimeters of Wood (Pine), the result is 5.51e-8 Short Tons (US).
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
5.51e-7 Short Tons (US) (Wood (Pine))
SwitchAPI and AI agent access
Cubic Centimeters to Short Tons (US) for Wood (Pine). Material: wood-pine.
Machine-readable identifiers
- Conversion family
material-density- Source unit
cubic_centimeter- Target unit
short_ton_us- Material
wood-pine
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "cubic_centimeter",
"to": "short_ton_us",
"material": "wood-pine"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "cubic_centimeter",
"to": "short_ton_us",
"result": {
"raw": 5.51155655462e-7,
"display": "5.51e-7"
},
"canonicalPath": "/material-density/cubic-centimeters-to-short-tons/wood-pine/"
}
}Explanation
Cubic Centimeters of Wood (Pine) convert to short tons (us) using one fixed density basis of 500 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Typical softwood pine density by moisture and species.
Common Conversion Values
| Cubic Centimeters (Wood (Pine)) | Short Tons (US) (Wood (Pine)) |
|---|---|
| 0.1 | 5.51e-8 |
| 1/4 | 1.38e-7 |
| 1/2 | 2.76e-7 |
| 1 | 5.51e-7 |
| 2 | 0.000001 |
| 5 | 0.000003 |
| 10 | 0.000006 |
| 25 | 0.000014 |
| 50 | 0.000028 |
| 100 | 0.000055 |
Methodology
Wood (Pine) density and calculation basis
Evidence status: needs-review.
Wood density depends on species and moisture content.
method: Wood properties depend on species and moisture; dry-mass/green-volume specific gravity is distinguished
Source basis: USDA Forest Products Laboratory, Rowell (2005), Moisture Properties, chapter 4. Chapter 4: moisture, specific gravity, species table. https://research.fs.usda.gov/treesearch/download/22044.pdf Applicability: conditional-comparison.
Specify species, moisture and apparent-volume convention.
The 160 kg/m³ balsa example does not state its moisture basis; do not assign 12% moisture from a convention.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 5.51e-7 ton (US) per cm^3.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.