Cubic Centimeters to Metric Tons for Wood (Oak)
Snapshot
For Wood (Oak), 1 Cubic Centimeter equals about 7.5e-7 Metric Tons.
- Material basis: Wood (Oak) at 750 kg/m^3.
- Example: For 0.1 Cubic Centimeters of Wood (Oak), the result is 7.5e-8 Metric Tons.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
7.5e-7 Metric Tons (Wood (Oak))
SwitchAPI and AI agent access
Cubic Centimeters to Metric Tons for Wood (Oak). Material: wood-oak.
Machine-readable identifiers
- Conversion family
material-density- Source unit
cubic_centimeter- Target unit
metric_ton- Material
wood-oak
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "cubic_centimeter",
"to": "metric_ton",
"material": "wood-oak"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "cubic_centimeter",
"to": "metric_ton",
"result": {
"raw": 7.5e-7,
"display": "7.5e-7"
},
"canonicalPath": "/material-density/cubic-centimeters-to-metric-tons/wood-oak/"
}
}Explanation
Cubic Centimeters of Wood (Oak) convert to metric tons using one fixed density basis of 750 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative hardwood oak density.
Common Conversion Values
| Cubic Centimeters (Wood (Oak)) | Metric Tons (Wood (Oak)) |
|---|---|
| 0.1 | 7.5e-8 |
| 1/4 | 1.88e-7 |
| 1/2 | 3.75e-7 |
| 1 | 7.5e-7 |
| 2 | 0.000002 |
| 5 | 0.000004 |
| 10 | 0.000008 |
| 25 | 0.000019 |
| 50 | 0.000038 |
| 100 | 0.000075 |
Methodology
Wood (Oak) density and calculation basis
Evidence status: needs-review.
Wood density depends on species and moisture content.
method: Wood properties depend on species and moisture; dry-mass/green-volume specific gravity is distinguished
Source basis: USDA Forest Products Laboratory, Rowell (2005), Moisture Properties, chapter 4. Chapter 4: moisture, specific gravity, species table. https://research.fs.usda.gov/treesearch/download/22044.pdf Applicability: conditional-comparison.
Specify species, moisture and apparent-volume convention.
The 160 kg/m³ balsa example does not state its moisture basis; do not assign 12% moisture from a convention.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 7.5e-7 t per cm^3.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.