Cubic Centimeters to Metric Tons for Ice
Snapshot
For Ice, 1 Cubic Centimeter equals about 9.17e-7 Metric Tons.
- Material basis: Ice at 917 kg/m^3.
- Example: For 0.1 Cubic Centimeters of Ice, the result is 9.17e-8 Metric Tons.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
9.17e-7 Metric Tons (Ice)
SwitchAPI and AI agent access
Cubic Centimeters to Metric Tons for Ice. Material: ice.
Machine-readable identifiers
- Conversion family
material-density- Source unit
cubic_centimeter- Target unit
metric_ton- Material
ice
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "cubic_centimeter",
"to": "metric_ton",
"material": "ice"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "cubic_centimeter",
"to": "metric_ton",
"result": {
"raw": 9.17e-7,
"display": "9.17e-7"
},
"canonicalPath": "/material-density/cubic-centimeters-to-metric-tons/ice/"
}
}Explanation
Cubic Centimeters of Ice convert to metric tons using one fixed density basis of 917 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative density for pure ice near 0 C.
Common Conversion Values
| Cubic Centimeters (Ice) | Metric Tons (Ice) |
|---|---|
| 0.1 | 9.17e-8 |
| 1/4 | 2.29e-7 |
| 1/2 | 4.58e-7 |
| 1 | 9.17e-7 |
| 2 | 0.000002 |
| 5 | 0.000005 |
| 10 | 0.000009 |
| 25 | 0.000023 |
| 50 | 0.000046 |
| 100 | 0.000092 |
Methodology
Ice density and calculation basis
Evidence status: publishable.
Approximate density of ice Ih at its normal-pressure melting point, rounded to the nearest kg/m³.
temperature: 273.152519 K
pressure: 101325 Pa
state: Hexagonal ice Ih, ordinary H2O
Source basis: IAPWS, R10-06(2009): Equation of State 2006 for H2O Ice Ih. Table 6, PDF p.12, normal-pressure melting point. https://iapws.org/technical-guidance/release/Ice-2009.download Applicability: adopted-context.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 9.17e-7 t per cm^3.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.