Cubic Centimeters to Metric Tons for Brick
Snapshot
For Brick, 1 Cubic Centimeter equals about 0.000002 Metric Tons.
- Material basis: Brick at 1,800 kg/m^3.
- Example: For 0.1 Cubic Centimeters of Brick, the result is 1.8e-7 Metric Tons.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.000002 Metric Tons (Brick)
SwitchAPI and AI agent access
Cubic Centimeters to Metric Tons for Brick. Material: brick.
Machine-readable identifiers
- Conversion family
material-density- Source unit
cubic_centimeter- Target unit
metric_ton- Material
brick
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "cubic_centimeter",
"to": "metric_ton",
"material": "brick"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "cubic_centimeter",
"to": "metric_ton",
"result": {
"raw": 0.0000018,
"display": "0.000002"
},
"canonicalPath": "/material-density/cubic-centimeters-to-metric-tons/brick/"
}
}Explanation
Cubic Centimeters of Brick convert to metric tons using one fixed density basis of 1800 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative fired clay brick density.
Common Conversion Values
| Cubic Centimeters (Brick) | Metric Tons (Brick) |
|---|---|
| 0.1 | 1.8e-7 |
| 1/4 | 4.5e-7 |
| 1/2 | 9e-7 |
| 1 | 0.000002 |
| 2 | 0.000004 |
| 5 | 0.000009 |
| 10 | 0.000018 |
| 25 | 0.000045 |
| 50 | 0.00009 |
| 100 | 0.00018 |
Methodology
Brick density and calculation basis
Evidence status: publishable.
Representative gross dry density of fired-clay brick, including product voids; brick types vary.
state: Fired-clay brick, gross dry volume
grade: Smoked Branco example; frogged, 20% voids
method: EN 771-1, density tolerance category D1
Source basis: Wienerberger, Smoked Branco technical specification. Physical properties: gross dry density. https://www.wienerberger.co.uk/content/dam/wienerberger/united-kingdom/marketing/documents-magazines/product-data-sheets/brick/new-versions/UK_MKT_DOC_BRI_12152210_Smoked_Branco.pdf Applicability: adopted-context.
Product example, not clay-particle density or a universal brick specification.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.0000018 t per cm^3.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.